CSG2 Command History—CSG1 R7 to CSG2 R1
The following sections document the changes to commands between the CSG1 Release 7 and the CSG2 Release 1:
•
Unchanged Commands
•
New Commands
•
Deleted Commands
•
Changed Commands
•
Changes to Module CSG Configuration Mode
•
Changes to Module CSG VLAN Configuration Mode
•
Changes to Accounting Configuration Mode
•
Changes to Billing Configuration Mode
•
Changes to Block Configuration Mode
•
Changes to Content Configuration Mode
•
Changes to Map Configuration Mode
•
Changes to Policy Configuration Mode
•
Changes to Refund Configuration Mode
•
Changes to Ruleset Configuration Mode
•
Changes to Service Configuration Mode
•
Changes to SNMP Timer Configuration Mode
•
Changes to Transport-Type Configuration Mode
•
Changes to User Group Configuration Mode
•
Changes to Weight Configuration Mode
Unchanged Commands
The following commands did not change between the CSG1 and the CSG2:
•
activation
•
class
•
flags
•
idle (CSG2 service)
•
inservice (CSG2 content)
•
ip (CSG2 content)
•
ip csg billing
•
ip csg content
•
ip csg policy
•
ip csg refund
•
ip csg service
•
meter increment
•
meter initial
•
meter minimum
•
mode
•
passthrough
•
pending
•
policy (CSG2 content)
•
retcode
•
service
•
show ip csg
New Commands
The following commands are new for the CSG2:
•
aoc append url
•
clear ip csg
•
ip csg bma keepalive
•
ip csg bma messages
•
ip csg bma retransmit
•
ip csg bma retries
•
ip csg bma window
•
ip csg case-sensitive
•
ip csg entries fragment
•
ip csg entries session user max
•
ip csg entries user idle
•
ip csg entries user max
•
ip csg ipc crashdump
•
ip csg ipc keepalive
•
ip csg ipc retransmit
•
ip csg ipc retries
•
ip csg mode single-tp
•
ip csg psd drain delay
•
ip csg psd drain packet
•
ip csg psd keepalive
•
ip csg psd margin
•
ip csg psd retransmit
•
ip csg psd retries
•
ip csg psd window
•
ip csg quota-server keepalive
•
ip csg quota-server messages
•
ip csg quota-server reassign
•
ip csg quota-server retransmit
•
ip csg quota-server retries
•
ip csg quota-server window
•
ip csg radius correlation
•
ip csg replicate
•
ip csg report smtp rfc2822
•
ip csg report wap actual-pdu
•
ip csg subscriber
•
match header
•
meter exclude mms wap
•
mode tcp
•
parse length
•
parse protocol
•
reauthorization threshold
•
reauthorization timeout
•
records delay
•
sami rate all
•
subscriber-ip http-header forwarded-for
•
vrf
Deleted Commands
The following CSG1 commands have been deleted from the CSG2:
•
accounting (module CSG2)
•
alias (module CSG2 VLAN)
•
assign
•
clear module csg
•
clear module csm
•
client (CSG2 content)
•
client-ip (CSG2 policy)
•
content (CSG2 ruleset)
•
copy
•
entries
•
failover
•
ft group (module CSG2)
•
gateway (module CSG2 VLAN)
•
heartbeat-time
•
hostname
•
ip address (module CSG2 VLAN)
•
ip csg accounting
•
ip csg user-group
•
ip csg weight
•
keepalive
•
module csg
•
ping
•
priority
•
radius acct-port
•
radius key
•
radius monitor
•
radius parse strict
•
radius server
•
records batch
•
records http-statistics
•
route (module CSG2 VLAN)
•
ruleset
•
show module csg arp
•
show module csg billing
•
show module csg clock
•
show module csg conns
•
show module csg ft
•
show module csg status
•
show module csg tech-support
•
show module csg variable
•
show module csg vlan
•
table (module CSG2 VLAN)
•
upgrade
•
user-group
•
variable (module csg)
•
vlan (module csg)
•
zero-quota abort type
Changed Commands
Table B-1 summarizes the changes made to commands between the CSG1 and the CSG2:
Table B-1 Commands That Changed Between CSG1 and CSG2
|
|
accounting |
All keywords and arguments except customer-string string were removed. |
agent (CSG2 accounting) |
The name of this command changed to ip csg bma. The vrf vrf-name keyword and argument were added. |
agent activate |
The name of this command changed to ip csg bma activate. The range of the number argument changed from 1 to 10, to 1 to 32. |
agent local-port |
The name of this command changed to ip csg bma local-port. |
aoc confirmation |
The name of this command changed to aoc confirm. The configuration mode for this command changed from CSG user group configuration to CSG2 service configuration. The list of supported special characters changed. |
authorize content |
The name of this command changed to aoc enable. |
basis |
The exclude mms keyword was removed. |
client-group (CSG2 content) |
The configuration mode for this command changed from CSG policy configuration to CSG2 content configuration. The range for the std-access-list-number argument increased from 1300 to 1999. |
content (CSG2 service) |
The weight-name argument was replaced with the weight-value argument. |
database |
The name of this command changed to ip csg database. The configuration mode for this command changed from CSG user group to global configuration. The vrf vrf-name and local-port keywords and arguments were added. |
debug ip csg |
The acl number, configuration sync, detail, dump, error, frag, global, ha, http, interm, ipc, mail, other, packet, priority, qs, replicate, service, session event, session state, stats, and vrf vrf-name, keywords and arguments were added. The any, bma, ipc, psd, and quota-server keywords were added for the gtp keyword. The agent, api, cpu, module number, quota, prepaid, record storage slot, and timer keywords and arguments were removed. |
entries idle (CSG2 billing) |
The name of this command changed to entries user idle. |
header-map |
This command, along with the url-map command, was incorporated into map. |
idle (CSG2 content) |
The default setting for the duration argument changed from 3600 seconds to 300 seconds. |
ip csg block |
The name of this command changed to block. The configuration mode for this command changed from global to CSG content configuration. |
ip csg map |
The header and url keywords were removed. |
ip csg snmp timer |
The psd keyword was added. The agent keyword was replaced with the bma keyword. |
ip csg transport-type |
The name of the command changed to ip csg transport-type assign. The ip-address and value arguments were added. |
keepalive |
The name of this command changed to ip csg bma keepalive. The configuration mode for this command changed from CSG accounting to global configuration. |
match (header map) |
The name of this command changed to match header. The configuration mode for this command changed from CSG header map configuration to CSG2 map configuration. The protocol protocol and value keywords and arguments were removed. The pattern argument was replaced with the value argument. |
match (url map) |
The name of this command changed to match url. The configuration mode for this command changed from CSG URL map configuration to CSG2 map configuration. The protocol protocol and method method keywords and arguments were removed. |
meter exclude |
The meter exclude command split into three new commands—meter exclude mms wap, meter exclude pause rtsp, and meter exclude svc-idle. |
meter imap |
The name of this command changed to meter include imap. The body-header, body-only, and body-other keywords changed to body header, body only, and body other, respectively. |
next-hop |
The configuration mode for this command changed from CSG policy configuration to CSG2 content configuration. The reverse keyword was added. |
owner id |
This command, along with the owner name command, was incorporated into owner. |
owner name |
This command, along with the owner id command, was incorporated into owner. |
quota activate |
The name of this command changed to ip csg quota-server activate. The configuration mode for this command changed from CSG user group configuration to global configuration. The range for the number argument changed from 1 to 10, to 1 to 32. |
quota local-port |
– The name of this command changed to ip csg quota-server local-port. – The configuration mode for this command changed from CSG user group configuration to global configuration. – The range for the port-number argument changed from 1 to 65535, to 1024 to 65535. |
quota server |
The name of this command changed to ip csg quota-server. The configuration mode for this command changed from CSG user group configuration to global configuration. The vrf vrf-name keyword and argument were added. The reassign keyword was removed. |
radius ack error |
The radius ack error command split into two new commands—ip csg radius ack error parse and ip csg radius ack error user. The configuration mode for this command changed from CSG user group configuration to global configuration. |
radius endpoint |
The name of this command changed to ip csg radius endpoint. The configuration mode for this command changed from module CSG configuration to global configuration. The vrf vrf-name and vrf sub-vrf-name keywords and arguments were added. The table table-name keyword and argument were removed. |
radius handoff |
The name of this command changed to ip csg radius handoff. The configuration mode for this command changed from CSG user group configuration to global configuration. |
radius pod attribute |
The name of this command changed to ip csg radius pod attribute. The configuration mode for this command changed from CSG user group configuration to global configuration. The 26 keyword was removed. |
radius pod nas |
The name of this command changed to ip csg radius pod nas. The configuration mode for this command changed from CSG user group configuration to global configuration. The vrf vrf-name keyword and argument were added. |
radius pod timeout |
The name of this command changed to ip csg radius pod timeout. The configuration mode for this command changed from CSG user group configuration to global configuration. |
radius proxy |
The name of this command changed to ip csg radius proxy. The configuration mode for this command changed from module CSG configuration to global configuration. The vrf vrf-name keyword and argument were added. The table table-name keyword and argument were removed. |
radius start restart session-id |
The name of this command changed to ip csg radius start restart session-id. The configuration mode for this command changed from module CSG configuration to global configuration. The 26 keyword was removed. |
radius stop purge |
The name of this command changed to ip csg radius stop purge. The configuration mode for this command changed from module CSG configuration to global configuration. The 26 keyword was removed. |
radius userid |
The name of this command changed to ip csg radius userid. The configuration mode for this command changed from module CSG configuration to global configuration. |
records format |
The name of this command changed to ip csg records format. The configuration mode for this command changed from CSG accounting configuration to global configuration. The variable-single-cdr keyword was replaced with the combined keyword. The http and wap keywords were added. |
records granularity |
The time keyword changed to seconds. The range for the seconds argument changed from 60 to 4294967295, to 5 to 86400. |
records intermediate |
The configuration mode for this command changed from CSG accounting configuration to CSG2 content configuration. The time keyword changed to seconds. The range for the seconds argument changed from 5 to 65535, to 5 to 86400. |
records max |
The name of this command changed to ip csg bma messages. The configuration mode for this command changed from CSG accounting configuration to global configuration. |
record-storage |
The name of this command changed to ip csg psd. The configuration mode for this command changed from CSG accounting configuration to global configuration. The vrf vrf-name keyword and argument were added. |
record-storage local-port |
The name of this command changed to ip csg psd local-port. The configuration mode for this command changed from CSG accounting configuration to global configuration. |
redirect |
The name of this command changed to ip csg redirect. The configuration mode for this command changed from CSG user group configuration to CSG2 service configuration. The interval seconds and maximum number keywords and arguments were added. The nat ip-address and port-number keyword and arguments were removed. |
refund-policy |
The name of this command changed to refund. |
replicate connection tcp |
The name of this command changed to replicate. The delay seconds keyword and argument were added. |
report http header |
The name of this command changed to ip csg report http header. The configuration mode for this command changed from CSG accounting configuration to global configuration. |
report radius attribute |
The name of this command changed to ip csg report radius attribute. The configuration mode for this command changed from CSG accounting configuration to global configuration. The 26 keyword was removed. |
report usage |
The name of this command changed to ip csg report usage. The configuration mode for this command changed from CSG accounting configuration to global configuration. |
show module csg accounting |
This command, along with the show module csg content and show module csg stats commands, was incorporated into show ip csg. |
show module csg content |
This command, along with the show module csg accounting and show module csg stats commands, was incorporated into show ip csg. |
show module csg stats |
This command, along with the show module csg accounting and show module csg content commands, was incorporated into show ip csg. |
snmp-server enable traps csg |
The bma, database, quota-server, records, and state keywords were added. The agent, database, and quota-server keywords were removed. |
url-map |
This command, along with the header-map command, was incorporated into map. |
user-profile server |
The name of this command changed to ip csg entries user profile. The configuration mode for this command changed from CSG user group to global configuration. |
verify |
The name of this command changed to verify enable. |
verify confirmation |
The name of this command changed to verify confirm. The configuration mode for this command changed from CSG user group configuration to CSG2 service configuration. The list of supported special characters changed. |
vlan (CSG2 content) |
The vlan-name argument was replaced with the vlan-number argument. |
Changes to Module CSG Configuration Mode
Table B-2 summarizations the changes to module CSG configuration mode between the CSG1 and the CSG2:
Table B-2 Summary of Changes to Module CSG Configuration Mode
|
|
module csg |
Removed. There is no module CSG configuration mode in the CSG2. The old module CSG configuration mode commands have been removed or replaced with global configuration mode commands. |
accounting (module CSG) |
Removed. |
ft group (module CSG) |
Removed. |
hostname |
Removed. |
radius endpoint |
ip csg radius endpoint |
radius proxy |
ip csg radius proxy |
ruleset |
Removed. |
variable |
Removed. |
vlan (module CSG) |
Removed. |
Changes to Module CSG VLAN Configuration Mode
Table B-3 summarizations the changes to module CSG VLAN configuration mode between the CSG1 and the CSG2:
Table B-3 Summary of Changes to Module CSG VLAN Configuration Mode
|
|
vlan (module CSG) |
Removed. There is no module CSG VLAN configuration mode in the CSG2. |
alias (module CSG VLAN) |
Removed. |
gateway (module CSG VLAN) |
Removed. |
ip address (module CDG VLAN) |
Removed. |
route (module CSG VLAN) |
Removed. |
table (module CSG VLAN) |
Removed. |
Changes to Accounting Configuration Mode
Table B-4 summarizations the changes to accounting configuration mode between the CSG1 and the CSG2:
Changes to Billing Configuration Mode
Table B-5 summarizations the changes to billing configuration mode between the CSG1 and the CSG2:
Table B-5 Summary of Changes to Billing Configuration Mode
|
|
ip csg billing |
Same command name and configuration mode. |
entries user idle |
New for CSG2. |
mode |
Same command name and configuration mode. |
service |
Same command name and configuration mode. |
Changes to Block Configuration Mode
Table B-6 summarizations the changes to block configuration mode between the CSG1 and the CSG2:
Table B-6 Summary of Changes to Block Configuration Mode
|
|
ip csg block |
block Moved to CSG2 content configuration mode. |
Changes to Content Configuration Mode
Table B-7 summarizations the changes to content configuration mode between the CSG1 and the CSG2:
Changes to Map Configuration Mode
Table B-8 summarizations the changes to map configuration mode between the CSG1 and the CSG2:
Table B-8 Summary of Changes to Map Configuration Mode
|
|
ip csg map |
Same command name and configuration mode. |
match (header map) |
match header Moved to CSG2 map configuration mode. |
match method |
New for CSG2. |
match (URL map) |
match url Moved to CSG2 map configuration mode. |
Changes to Policy Configuration Mode
Table B-9 summarizations the changes to policy configuration mode between the CSG1 and the CSG2:
Table B-9 Summary of Changes to Policy Configuration Mode
|
|
ip csg policy |
Same command name and configuration mode. |
accounting |
Same command name and configuration mode. |
client-group (CSG2 content) |
Moved to CSG2 content configuration mode. |
client-ip (CSG policy) |
Removed. |
header-map |
map |
next-hop |
Moved to CSG2 content configuration mode. |
url-map |
map |
Changes to Refund Configuration Mode
Table B-10 summarizations the changes to refund configuration mode between the CSG1 and the CSG2:
Table B-10 Summary of Changes to Refund Configuration Mode
|
|
ip csg refund |
Same command name and configuration mode. |
flags |
Same command name and configuration mode. |
retcode |
Same command name and configuration mode. |
Changes to Ruleset Configuration Mode
Table B-11 summarizations the changes to ruleset configuration mode between the CSG1 and the CSG2:
Table B-11 Summary of Changes to Ruleset Configuration Mode
|
|
ip csg ruleset |
Removed. |
Changes to Service Configuration Mode
Table B-12 summarizations the changes to service configuration mode between the CSG1 and the CSG2:
Changes to SNMP Timer Configuration Mode
Table B-13 summarizations the changes to SNMP timer configuration mode between the CSG1 and the CSG2:
Table B-13 Summary of Changes to SNMP Timer Configuration Mode
|
|
ip csg snmp timer |
ip csg snmp timer |
Changes to Transport-Type Configuration Mode
Table B-14 summarizations the changes to transport-type configuration mode between the CSG1 and the CSG2:
Changes to User Group Configuration Mode
Table B-15 summarizations the changes to user group configuration mode between the CSG1 and the CSG2:
Changes to Weight Configuration Mode
Table B-16 summarizations the changes to weight configuration mode between the CSG1 and the CSG2:
Table B-16 Summary of Changes to Weight Configuration Mode
|
|
ip csg weight |
Removed. |