Domain Filtering Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Domain Filtering Guide

Chapter Title

Introduction

Results

Updated:
June 15, 2020

Chapter: Introduction

Introduction

This document introduces the Domain Filtering feature and provides general guidelines for its deployment. The purpose of this document is to:

  • Provide an overview of Domain Filtering

  • Highlight supported key features and limitations

  • Provide details on deploying and configuring Domain Filtering

Pre-requisite

  • Beta customers must have AireOS 8.3 release installed on a supported WLC (see requirements).

  • For the beta, AVC Engine Version 23 / Protocol Pack Version 16 must be manually installed on the WLC for Domain Filtering to function (provided on the beta web site).

  • Domain Filtering requires the WLAN traffic to be centrally forwarded through the WLC. For this beta Domain Filtering requires Access Points to be operating in Local Mode or FlexConnect WLANs to be configured for Central Switching.

Requirements

Domain Filtering will be supported on the following Wireless LAN Controller platforms:

  • Cisco 5508 Wireless LAN Controller

  • Cisco 5520 Wireless LAN Controller

  • Cisco 8510 Wireless LAN Controller

  • Cisco 8540 Wireless LAN Controller

  • Wireless Services Module 2 (WiSM2)

  • Cisco Flex 7500 Wireless LAN Controller (FlexConnect Central Switching Only)

Components Used

The information in this document was created from devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco