The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Configuring Client Exclusion Policies
Configuring Client Exclusion Policies
On the Security > Wireless Protection Policies > Client Exclusion Policies page, choose check boxes for one or more of the following events based on which to exclude clients:
Excessive 802.11 Association Failures—Clients are excluded on the sixth 802.11 association attempt, after five consecutive failures.
Excessive 802.11 Authentication Failures—Clients are excluded on the sixth 802.11 authentication attempt, after five consecutive failures.
Excessive 802.1X Authentication Failures—Clients are excluded on the fourth 802.1X authentication attempt, after three consecutive failures.
IP Theft or IP Reuse—Clients are excluded if the IP address is already assigned to another device.
Excessive Web Authentication Failures—Clients are excluded on the fourth web authentication attempt, after three consecutive failures.
Feedback