t_gen_set_sch_config_adv

Available Languages

Updated:November 29, 2020

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Configuring Advanced Profile Settings

Note: Advanced settings are applicable to CiscoTAC-1 and all the custom profiles on your device.

Use the Administration > Smart Call Home > Advanced page to configure advanced settings for all the profiles on your device.

To prevent your device from sending repetitive syslog messages, select the Syslog Throttling check box.
From the Data Privacy Level drop-down list, choose the privacy level to scrub data from Smart Call Home messages to protect your privacy. The default data-privacy level is Normal. Setting the privacy level to High scrubs data such as the IP address and IP domain name from the messages.
Select the Remove Host Name check box to remove the host name from the subject line of the Smart Call Home notification email that is sent.
To enable AAA authorization for Smart Call Home messages, select the AAA Authorization check box. Specify the user name for authorization. The default user name is callhome.
Click Save and Apply to save your changes.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)