The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Configuring Access Policies for WLANs/RLANs
Configuring Access Policies for WLANs/RLANs
On the Configure > WLANs > Access Policies, choose the interface with which you want to associate the access policy.
To configure additional access policy settings, click Hide.
To enable multicast for the access policy, check the Enable Multicast check box.
Choose the multicast interface you want to associate with the access policy.
Check the Device Classification check box to enable device classification on the WLAN/RLAN and allow client devices to properly connect, maintain their connection while in the cell, and roam seamlessly when needed.
Choose a local subscriber policy to associate with the policy.
To enable Local HTTP Profiling for the WLAN/RLAN, select the check box.
To enable RADIUS HTTP Profiling for the WLAN/RLAN, select the WLAN/RLAN.
Feedback