t_services_ssid_qos_config

Available Languages

Updated:July 31, 2020

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Configuring SSID QoS Policies

Configuring SSID QoS Policies

Use the Services > QoS Wireless> Configure > QoS Policy page to create SSID QoS policies. To monitor QoS statistics for SSIDs, use theMonitoring > Statistics > QoS page.

  1. On the Services > QoS Wireless > Configure page, to add a new SSID QoS policy, click Add in the QoS Policy section.
  2. In the Basic Quick-Policy Setup section, enter a name for the policy and a short description for it.
  3. Choose SSID policy type from the Policy Type drop-down list.
  4. From theTrust drop-down field, choose to associate either DSCP, User Priority, or None values to classify and trust your ingress traffic.
  5. In the Police (kbps) field, enter the policing rate.
  6. Click Save.
  7. Click Apply.

 

© 2020 Cisco Systems, Inc. All rights reserved.

 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products