t_config_application_visibility

Available Languages

Updated:July 31, 2020

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Configuring Application Visibility

Configuring Application Visibility

ClosedAbout Application Visibility

On the Configuration > Services > Application Visibility page, you can configure application-level classification, monitoring, and traffic control, that allows:

  • Better network capacity management and planning, through greater visibility of application usage and performance
  • Lower operating costs
  • Faster troubleshooting and less network downtime

 

  1. On the Configuration > Services > Application Visibility page, move the required profiles listed in the Available section to the Enabled section.

Note: You can also enable all the profiles listed in the Available section at once by clicking Enable All.

  1. Click Apply.

 

Related Topics Link IconRelated Topics

 

© 2020 Cisco Systems, Inc. All rights reserved.

 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco