t_gen_set_system_logs

Available Languages

Updated:January 24, 2020

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Configuring System, Web Server, and License Logs

Configuring System, Web Server, and License Logs

  1. Choose Troubleshooting > Logs > Syslog.
  2. Under Config Syslog, click Add.
  3. Enter the IP address of the server to which you want to send message logs.
  4. Specify the severity level for logging messages to the device buffer and console. You can choose one of the following options:
    • Emergencies—Severity level 0
    • Alerts—Severity level 1
    • Critical—Severity level 2
    • Errors—Severity level 3 (default value)
    • Warnings—Severity level 4
    • Notifications—Severity level 5
    • Informational—Severity level 6
    • Debugging—Severity level 7
    • Disable—Disable console logging

Note: If you set a logging level, only those messages whose severity is equal to or less than that level are logged by the controller. For example, if you set the logging level to Warnings (severity level 4), only those messages whose severity is between 0 and 4 are logged.

  1. Click Save & Apply to Device.
ClosedViewing Syslogs

The Syslog page enables you to view the message logs that have been captured by the controller, by the lastto the first message. Each trap entry includes the system time, filename and line, message type and message.

ClosedConfiguring Web UI Logs

Under Web UI Logs, click Generate logs with running-config to generate logs for the Web User Interface for your device. You also have the option to download the generated logs.

Viewing Web Server Logs

  1. Choose Troubleshooting > Logs > Web Server Logs.
  2. Choose either Access Log or Error Log.
  3. Specify the number of lines you want displayed from the log. For example, if you type 100, the last 100 lines in the log are displayed.
  4. Click View.To download the complete log, click Download Full Log. Based on what you selected, the complete error log or access log is downloaded to your computer.

Viewing License Logs

  1. Choose Troubleshooting > Logs > License Logs.
  2. Specify the License Event logs for days.
  3. Click View.To download the complete log, click Download Full Log. Based on what you selected, the complete error log or access log is downloaded to your computer.

 

© 2020 Cisco Systems, Inc. All rights reserved.

 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products