t_sec_aaa_config_server_grps

Available Languages

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Configuring AAA Server Groups

Configuring AAA Server Groups

Configuring the device to use AAA server groups provides a way to group existing server hosts, select a subset of the configured server hosts and use them for a particular service. A server group is used with a global server-host list. The server group lists the IP addresses of the selected server hosts.

You can create the following server groups:

ClosedRADIUS
  1. On the Services > Security > AAA >Server Groups > RADIUS page, click Add.
  2. In the Quick Setup: AAA RADIUS Server Group section, enter a name for the RADIUS server group.
  3. Choose the delimiter to be used in the MAC addresses that are sent to the RADIUS server, from the MAC-Delimiter drop-down list.
  4. Choose a value from the MAC Filtering drop-down list, based on which to filer MAC addresses.
  5. To configure dead time for the server group and direct AAA traffic to alternative groups of servers that have different operational characteristics, in the Dead-Time field, enter the amount of time, in minutes, after which a server is assumed to be dead.
  6. Choose the servers that you want to include in the server group, from the Available Servers list and move them to the Assigned Servers list.
  7. Click Done and Apply.
ClosedTACACS+
  1. On the Services > Security > AAA >Server Groups > TACACS+ page, click Add.
  2. In the Quick Setup: AAA TACACS+ Server Group section, enter a name for the TACACS+ server group.
  3. Choose the servers that you want to include in the server group, from the Available Servers list and move them to the Assigned Servers list.
  4. Click Done and Apply.
ClosedLDAP
  1. On the Services > Security > AAA >Server Groups > LDAP page, click Add.
  2. In the Quick Setup: AAA LDAP Server Group section, enter a name for the LDAP server group.
  3. Choose the servers that you want to include in the server group, from the Available Servers list and move them to the Assigned Servers list.
  4. Click Done and Apply.

 

Related Topics Link IconRelated Topics

 

© 2018 Cisco Systems, Inc. All rights reserved.

 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products