The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Mode |
Native VLAN |
Non-Native VLAN |
---|---|---|
FlexConnect Local Switching |
Supported |
Supported |
Local Mode Central Switching |
Supported |
Supported |
The module can be powered up by the PoE+ power supply
Co-existence detection and warning when Wi-Fi in 2.4 GHz and 3G/4G module are enabled
The module's inventory details are available on the Cisco WLC GUI at
.For more information about Cisco Universal Small Cell 8x18 Dual-Mode modules, see http://www.cisco.com/c/en/us/support/wireless/universal-small-cell-8000-series/tsd-products-support-series-home.html.
Enable or disable the Cisco USC 8x18 Dual-Mode Module by entering this command: config ap module3G {enable | disable} ap-name
You might be prompted with a co-existence warning when Wi-Fi in 2.4-GHz and 3G/4G module are enabled.
config ap flexconnect module-vlan enable ap-name —Enables FlexConnect local switching for external module with native VLAN
config ap flexconnect module-vlan remove ap-name—Removes the AP specific external module VLAN configuration
config ap flexconnect module-vlan enable ap-name vlan vlan-id—Enables FlexConnect local switching with non-native VLAN for the external module
show ap module summary {ap-name | all}—Displays detailed information about the external module.
show ap inventory {ap-name | all}—Displays information about the AP’s inventory and the external module, if the module is present
show ap flexconnect module-vlan ap-name—Displays status of FlexConnect local switching and VLAN ID value
show ap config general ap-name—Displays information about the external module info, if the module is present.
config flexconnect group group-name module-vlan enable vlan vlan-id—Enables FlexConnect local switching for the FlexConnect group
config flexconnect group group-name module-vlan disable—Disables the FlexConnect local switching for the FlexConnect group
show flexconnect group detail group-name module-vlan—Displays status of the FlexConnect local switching and VLAN ID in the group
Create a Remote LAN.
For instructions to create a remote LAN, see the Configuring Remote LANs chapter under WLANs.
config interface 3g-vlan interface-name {enable | disable}—Enables or disables the 3G/4G-VLAN interface
show interface detailed interface-name—Displays status of the 3G/4G-VLAN flag
show client summary ip—Displays status of the 3G/4G clients