Cisco Wireless Controller Configuration Guide, Release 7.6

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book

Results

Updated:
July 11, 2014

Chapter: Validating WLAN Mobility Security Values

Validating WLAN Mobility Security Values

WLAN Mobility Security Values

For any anchoring or mobility event, the WLAN security policy values on each controller must match. These values can be validated in the controller debugs. This table lists the WLAN mobility security values and their corresponding security policy.

Table 1. WLAN Mobility Security Values

Security Hexadecimal Value

Security Policy

0x00000000

Security_None

0x00000001

Security_WEP

0x00000002

Security_802_1X

0x00000004

Security_IPSec*

0x00000008

Security_IPSec_Passthrough*

0x00000010

Security_Web

0x00000020

Security_PPTP*

0x00000040

Security_DHCP_Required

0x00000080

Security_WPA_NotUsed

0x00000100

Security_Cranite_Passthrough*

0x00000200

Security_Fortress_Passthrough*

0x00000400

Security_L2TP_IPSec*

0x00000800

Security_802_11i_NotUsed

Note 

Controllers running software release 6.0 or later do not support this security policy.

0x00001000

Security_Web_Passthrough

Was this Document Helpful?

FeedbackFeedback

Contact Cisco