Management over Wireless
The management over wireless feature allows you to monitor and configure local controllers using a wireless client. This feature is supported for all management tasks except uploads to and downloads from (transfers to and from) the controller.
This feature blocks wireless management access to the same controller that the wireless client device is currently associated with. It does not prevent management access for a wireless client associated with another controller entirely. To completely block manabgement access to wireless clients based on VLAN and so on, we recommend that you use access control lists (ACLs) or similar mechanism.
Restrictions on Management over Wireless
Management over Wireless can be disabled only if clients are on central switching.
Management over Wireless is not supported for FlexConnect local switching clients. However, Management over Wireless works for non-web authentication clients if you have a route to the controller from the FlexConnect site.
This section contains the following subsections: