Configuring Ports (GUI)
The controller’s ports are configured with factory-default settings designed to make the controllers’ ports operational without additional configuration. However, you can view the status of the controller’s ports and edit their configuration parameters at any time.
Chooseto open the Ports page.
This page shows the current configuration for each of the controller’s ports.
If you want to change the settings of any port, click the number for that specific port. The Port > Configure page appears.
The following show the current status of the port:
The following is a list of the port’s configurable parameters.
Click Save Configuration.
Click Back to return to the Ports page and review your changes.
Repeat this procedure for each additional port that you want to configure.