The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Contents
C - D - E - F - I - L - M - N - P - R - S - T - V -Index
C
configuration files 1D
definition
VLAN 1
deletion
VLAN 1
domain names 1E
Ethernet VLAN 1
extended-range VLAN 1
extended-range VLAN configuration guidelines 1
extended-range VLANs 1F
feature information
VLANs 1
VLAN trunks 1
VTP 1I
IEEE 802.1Q tagging 1L
Layer 2 interface modes 1
load sharing 1 2
trunk ports 1M
monitoring
VTP 1
MST mode 1N
native VLAN 1
Network Load Sharing
STP path cost 1
STP priorities 1
normal-range
VLAN configuration guidelines 1P
password 1
prerequisites
VLANs 1
VLAN trunks 1
VTP 1
pruning-eligible list 1
PVST mode 1R
restrictions
VLANs 1
VLAN trunks 1
VTP 1S
STP path cost 1
STP port priorities 1T
Token Rings 1
trunk 1
configuration 1
trunk port 1
trunking 1
trunking modes 1
trunks
allowed VLANs 1V
VLAN
definition 1
VLAN monitoring commands 1
VLAN port membership modes 1
VTP 1
configuration requirements 1
version 1
VTP advertisements 1
VTP domain 1 2
VTP mode 1
VTP modes 1
VTP password 1
VTP primary 1
VTP pruning 1 2
VTP settings 1
VTP version 1
VTP version 2 1
VTP version 3 1
VTP versions 1