Cisco Spaces: Connector Configuration Guide

Connecting a Connector to Cisco Catalyst 9300 Series Switches and Cisco Catalyst 9400 Series Switches Series

Connecting a Connector to Cisco Catalyst 9300 Series Switches and Cisco Catalyst 9400 Series Switches

Deploy a Connector OVA and activate it using a token from Cisco Spaces.
The IP address of a Cisco Catalyst 9300 Series Switches and Cisco Catalyst 9400 Series Switches that is reachable from the Cisco Spaces: Connector.
Test the Netconf commands on the Cisco Catalyst 9300 Series Switches and Cisco Catalyst 9400 Series Switches

Log in to Cisco Spaces.
In the Cisco Spaces dashboard, choose Setup > Wired Networks.
From the Step 3: Add Switches area, click Add Switch.
From the Add Switches page, select the Connector, enter a name to identify the switch, the switch IP address. Netconf username, Netconf password, and click the checkbox to acknowledge that you have tested these commands on the switch.
Click Test to see if the connection to the switch.
Do one of the following:

Step 1	Log in to Cisco Spaces.
Step 2	In the Cisco Spaces dashboard, choose Setup > Wired Networks.
Step 3	From the Step 3: Add Switches area, click Add Switch. Figure 1.
Step 4	From the Add Switches page, select the Connector, enter a name to identify the switch, the switch IP address. Netconf username, Netconf password, and click the checkbox to acknowledge that you have tested these commands on the switch.
Step 5	Click Test to see if the connection to the switch.
Step 6	Do one of the following: Click Save & Add Next Switch Click Save & Close