This command is used to configure default dscp-marking value for qci.

Product

HeNBGW

Privilege

Security Administrator, Administrator

Mode

Exec > LTE Policy > HENBGW QCI DSCP Mapping Table Configuration

configure > lte-policy > henbgw qci-dscp-mapping-table table_name

Entering the above command sequence results in the following prompt:

[context_name]host_name(config-henbgw-qci-dscp-mapping-table)#

Syntax

Syntax Description

dscp-marking-default { af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | be | cs0 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | ef } 
no dscp-marking-default 

no

Disables the configuration of default dscp-marking value for qci.

dscp-marking-default { af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | be | cs0 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | ef }

Specifies the default dscp-marking value for qci.dscp-marking-default designates the use of one of the following as default value:

af11: Assured Forwarding 11 per-hop-behavior (PHB)

af12: Assured Forwarding 12 PHB

af13: Assured Forwarding 13 PHB

af21: Assured Forwarding 21 PHB

af22: Assured Forwarding 22 PHB

af23: Assured Forwarding 23 PHB

af31: Assured Forwarding 31 PHB

af32: Assured Forwarding 32 PHB

af33: Assured Forwarding 33 PHB

af41: Assured Forwarding 41 PHB

af42: Assured Forwarding 42 PHB

af43: Assured Forwarding 43 PHB

be: Best effort forwarding PHB. This is same as DSCP value CS0.

cs0: Class Selector 0 PHB. This is same as DSCP Value BE.

cs1: Class Selector 1 PHB.

cs2: Class Selector 2 PHB.

cs3: Class Selector 3 PHB.

cs4: Class Selector 4 PHB.

cs5: Class Selector 5 PHB.

cs6: Class Selector 6 PHB.

cs7: Class Selector 7 PHB.

ef: Expedited forwarding PHB

Usage Guidelines

Use this command to configure default dscp-marking value for qci.

Exits the current configuration mode and returns to the Exec mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

Syntax Description

end

Usage Guidelines

Use this command to return to the Exec mode.

Exits the current mode and returns to the parent configuration mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

Syntax Description

exit

Usage Guidelines

Use this command to return to the parent configuration mode.

This command is used to configure qci value for HENBGW.

Product

HeNBGW

Privilege

Security Administrator, Administrator

Mode

Exec > LTE Policy > HENBGW QCI DSCP Mapping Table Configuration

configure > lte-policy > henbgw qci-dscp-mapping-table table_name

Entering the above command sequence results in the following prompt:

[context_name]host_name(config-henbgw-qci-dscp-mapping-table)#

Syntax

Syntax Description

qci qci_value dscp-marking { af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | be | cs0 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | ef }
no qci qci_value 

no

Disables the configuration of qci value for HeNBGW.

qci_value

This is an integer between 0 and 255.

dscp-marking { af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | be | cs0 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | ef }

Configures dscp-marking value for qci.dscp-marking designates the use of one of the following as qci value:

af11: Assured Forwarding 11 per-hop-behavior (PHB)

af12: Assured Forwarding 12 PHB

af13: Assured Forwarding 13 PHB

af21: Assured Forwarding 21 PHB

af22: Assured Forwarding 22 PHB

af23: Assured Forwarding 23 PHB

af31: Assured Forwarding 31 PHB

af32: Assured Forwarding 32 PHB

af33: Assured Forwarding 33 PHB

af41: Assured Forwarding 41 PHB

af42: Assured Forwarding 42 PHB

af43: Assured Forwarding 43 PHB

be: Best effort forwarding PHB. This is same as DSCP value CS0.

cs0: Class Selector 0 PHB. This is same as DSCP Value BE.

cs1: Class Selector 1 PHB.

cs2: Class Selector 2 PHB.

cs3: Class Selector 3 PHB.

cs4: Class Selector 4 PHB.

cs5: Class Selector 5 PHB.

cs6: Class Selector 6 PHB.

cs7: Class Selector 7 PHB.

ef: Expedited forwarding PHB

Usage Guidelines

Use this command to configure qci value for HENBGW.