The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter includes the show cloud command output tables.
The show cloud commands are only supported on virtualized platforms.
| Field | Description |
|---|---|
| Card <n> | Card slot number. |
| Config Disk P[arameters | Information about the current virtual disk configuration. |
| Local Params: | |
| CARDSLOT= | Card slot number. |
| CARDTYPE= | Hexadecimal card type identifier. |
| CPUID= | Associated CPU number. |
| Field | Description |
|---|---|
|
CPU Nodes |
Number of CPU nodes. |
|
CPU Cores/Threads |
Number of cores/threads. |
|
Memory |
vMemory in Megabytes. |
|
Hugepage size |
Page size. |
|
cpeth0: |
VPC-DI network communication port. |
|
Driver |
Driver type. |
|
loeth0: |
CF only: LOCAL management port (Console). |
|
Driver |
Driver type. |
|
portslot_port |
SF only: Service port. |
|
Driver |
Driver type. |
| Field | Description |
|---|---|
| The following fields appear for both summary and detail command options. | |
| Card <n> Test Results | Card slot number on which monitoring has been performed. |
| ToCard | Slot number of the card to which traffic was routed. |
|
Health |
"Bad" indicates a packet loss rate of larger than 1%. Otherwise the Health is "Good". |
|
5MinLoss |
Percentage of packets lost for the past five minutes. |
|
60MinLoss |
Percentage of packets lost for the past 60 minutes. |
| The following fields only appear for the detail command option. | |
|
Dest |
The reported statistics refer to the communication between this card and the card number specified when running the command. |
|
TotalPkt |
Total number of packets sent. |
|
JumboPkt |
Number of jumbo packets sent. |
|
TotalDrops |
Total number of jumbo and non-jumbo test packets that were dropped. |
|
JumboDrops |
Number of jumbo test packets that were dropped. |
|
LongRTT |
Longest Round Trip Time (RTT) in milliseconds. |
|
AverageRTT |
Average Round Trip Time (RTT) in milliseconds. |
|
Last 10 RTT in milliseconds (starting from most current) |
|
| Field | Description |
|---|---|
|
Cards |
Indicates the card slot number that originated the monitoring request. |
|
Src |
Indicates the card slot number that originated the monitoring request. |
|
Dst |
Indicates the card slot number to which the request was directed. |
|
15 Second Interval / 5 Minute Interval / 60 Minute Interval (Control Plane only) |
|
|
Xmit |
Indicates the total number of packets transmitted for a 15-second interval. |
|
Recv |
Indicates the total number of packets received for a 15-second interval. |
|
Miss% |
Indicates the drop/lost percentage. If insufficient data is collected for a complete interval, “-incomplete” is displayed. |
|
15 Second Interval / 5 Minute Interval / 60 Minute Interval (Data Plane only) |
|
|
Miss |
Indicates the difference in the number of packets transmitted versus the number of packets received |
|
Hit |
Indicates the total number of packets received for a 15-second interval. |
|
Pct |
Indicates the drop/lost percentage. If insufficient data is collected for a complete interval, “-incomplete” is displayed. |
Feedback