tracking area code (TAC) or area codes where a UE, associated with this LTE
policy, is restricted from participating in a handover scenario.
Exec > Global
Configuration > LTE Policy Configuration > LTE HO Restriction List
Configuration > LTE Forbidden Tracking Area Configuration
configure > lte-policy > ho-restrict-list
> forbidden tracking-area
Entering the above
command sequence results in the following prompt:
[ no ] tac area_code +
Removes a configured
forbidden handover area code or area codes from this policy. If no tracking
area code is specified, then all tracking area codes are removed.
Specifies a tracking
area code or area codes from which UEs are restricted from participating in a
handover as an integer from 0 to 65535. Multiple area codes can be entered (up
to 128 in a single line, separated by spaces).
Indicates that multiple area codes up to 128 in a single line,
separated by spaces, can be entered in this command.
Use this command to
configure tracking area codes that will be forbidden to UEs associated with
this LTE policy.
command configures eight tracking area codes (1, 2, 3, 4, 5, 6, 7, 8) where a
UE, associated with this LTE policy, is restricted from participating in a
tac 1 2 3 4 5 6 7 8