Associate an APN remap table with this IMEI profile.
Note that an APN remap table can be associated with an IMEI profile before the table has actually been created/configured.
Security Administrator, Administrator
Exec > Global Configuration > IMEI Profile Configuration
configure > imei-profile profile_name
Entering the above command sequence results in the following prompt:
associate apn-remap-table table_name no associate apn-remap-table
Disables the configured remap table association.
Define the name of an APN remap table that is to be associated with this IMEI profile for call routing based in IMEI.
Use this command to associate an APN remap table with this IMEI profile. With such an association, it is possible to override an APN call-routing based on an IMEI.
For example, with the APN exceptions defined in an APN remap table (refer to the APN Remap Table Configuration Mode chapter), a blank APN or an incorrect APN could be overriden. So during PDP Activation for in incoming call, the call could be rerouted based on an IMEI in the range defined for the IMEI profile.
associate apn-remap-table remapHO