Creates and configures an S102 service instance to manage an S102 interface. The S102 interface is used in support of the CSFB for CDMA 1xRTT feature and the SRVCC for CDMA 1xRTT feature.
Security Administrator, Administrator
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[ no ] s102-service service_name
Remove the configuration for the specified S102 service from the configuration of the current context.
Specifies the name of the S102 service as a unique alphanumeric string from 1 through 63 characters in length.
Service names must be unique across all contexts within a chassis.
Use this command to create, edit, or remove an S102 service. The S102 service configuration is used to configure and manage the S102 interface.
An unlimited number of S102 service configurations can be created. However, for the S102 interface associated with the S102 service configuration to function, the S102 service/interface must be associated with an MME service, using the associate command in the MME service configuration mode. This requirement effectively limits the MME to supporting a maximum of 8 'associated' S102 service configurations at one time.
For details on the configuration and use of an S102 service/interface, refer to either the CSFB for 1xRTT or SRVCC for 1xRTT feature chapter in the MME Administration Guide.