This command binds the CBS service to the IP address of a logical interface.
Security Administrator, Administrator
Exec > Global Configuration > Context Configuration > Cell Broadcasting Service Configuration
configure > context context_name cbs-service service_name
Entering the above command sequence results in the following prompt:
bind address ip_address port port_number no bind address
Removes a previously configured binding.
Specifies the IPv4 type IP address of CBS service. ip_address must be expressed in IPv4 dotted-decimal notation.
Specifies the TCP port of the CBS service. port_number is an integer between 1 and 65535. Standard port used for service area broadcast ptotocol (SABP) is 3452 in case no other port is configured. It is an optional parameter.
Use this command to associate or tie a CBS service to a specific logical IP address previously configured in the current context and bound to a port.
bind address 192.168.1.111 port 8888