Record Type
|
0
|
M
|
The field identifies
the type of the record.
|
Integer
|
1
|
80
|
Network initiated PDP context
|
1
|
O
|
This field indicates
that the PDP context was network initiated. This field is missing
in case of mobile activated PDP context.
|
Boolean
|
1
|
81
|
Served IMSI
|
3
|
M
|
This field contains
the International Mobile Subscriber Identity (IMSI) of the served party.
|
BCD encoded octet string.
|
3 - 8
|
83
|
Served IMEI
|
4
|
O
|
This field contains
the international mobile equipment identity (IMEI) of the equipment served.
|
BCD encoded octet string.
IMEISV will be sent in case if IMEI is not available.
|
8
|
84
|
SGSN Address
|
5
|
M
|
This field provides
the current SGSN IP Address for the Control Plane.
|
Choice
|
6
|
A5
|
SGSN Binary IPv4 Address
|
5-0
|
M
|
This field represents
the IPv4 binary address.
|
Octet string
|
4
|
80
|
MS Network Capability
|
6
|
O
|
MS Network Capability
field contains the MS network capability value of the MS network
capability information element of the served MS on PDP context activation
or on GPRS attachment as defined in 3GPP TS 24.008.
|
Octet string
|
1 - 8
|
86
|
Routing Area
|
7
|
O
|
This field contains
the Routing Area Code (RAC) of the routing area in which the served
party is currently located.
|
Octet string
|
1
|
87
|
Location Area Code
|
8
|
O
|
This field contains
the Location Area Code (LAC) of the location area in which the served
party is currently located.
|
Octet string
|
2
|
88
|
Cell Identifier
|
9
|
O
|
For GSM, the Cell Identifier
is defined as the Cell Id, reference 24.008, and for UMTS it is
defined as the Service Area Code in TS 25.413.
|
Octet string
|
2
|
89
|
Charging ID
|
10
|
M
|
This field is a charging
identifier, which can be used together with the GGSN address to identify
all records produced in the GGSN involved in a single PDP context.
The Charging ID is generated by the GGSN at PDP context activation
and is transferred to the context requesting SGSN
|
Octet string
|
1 - 5
|
8a
|
GGSN Address
|
11
|
M
|
This field provides
the current SGSN IP Address for the Control Plane.
|
Choice
|
9 - 17
|
AB
|
GGSN Binary IPV4 Address
|
11-0
|
M
|
This field represents
the IPv4 binary address.
|
Octet string
|
7 - 15
|
80
|
Access Point Name Network Identifier
|
12
|
M
|
This field contains
the Network Identifier part of the Access Point Name (APN).
|
IA5 string
|
1 - 63
|
8c
|
PDP Type
|
13
|
O
|
This field defines the
PDP type, e.g. IP or PPP
|
Octet string
|
2
|
8d
|
Served PDP Address
|
14
|
O
|
This field contains
the PDP address of the served IMSI, for which the standard 3GPP
TS 32.298 allows a choice of either IP Address or ETSI Address.
|
Choice
|
11 - 19
|
ae
|
Served PDP IP Address
|
14-0
|
M
|
Only the choice of
IP Address is supported by the SGSN for the field described above.
|
Choice
|
9 - 17
|
a0
|
Served PDP IPV4 Binary Address
|
14-0-0
|
M
|
The octet string included
in the field described above includes the IPv4 address assigned
to the subscriber by GGSN in binary coding.
|
Octet string
|
7 - 15
|
80
|
List of Traffic Volumes
|
15
|
M
|
|
Sequence
|
|
af
|
Change Of Charging Condition
|
15-0
|
M
|
Each traffic volume
container contains details related to a charging condition.
A new container is
usually created for a QoS change and for tariff changes.
|
Sequence
|
|
30
|
QoS Requested
|
15-0-1
|
O
|
The Quality of Service
Requested field contains the QoS desired by the MS at PDP context activation.
In Rel.9, the QoS length is from 4 bytes to 17 bytes.
|
Octet string
|
4 - 17
|
81
|
QoS Negotiated
|
15-0-2
|
O
|
QoS Negotiated indicates
the applied QoS accepted by the network. In Rel.9, the QoS length
is from 4 bytes to 17 bytes.
|
Octet string
|
4 - 17
|
82
|
Data Volume GPRS Uplink
|
15-0-3
|
OC
|
It includes the number
of octets received in the uplink direction during the timeframe
specified by the container. For each new container, the counter
is reset and does not accumulate.
Important: This attribute will
not be sent for Direct Tunnel (DT) sessions.
|
Integer
|
1 - 4
|
83
|
Data volume GPRS Downlink
|
15-0-4
|
OC
|
It includes the number
of octets transmitted in the downlink direction during the timeframe specified
by the container. For each new container, the counter is reset and does
not accumulate.
Important: This attribute will
not be sent for Direct Tunnel (DT) sessions.
|
Integer
|
1 - 4
|
84
|
Change Condition
|
15-0-5
|
M
|
The Change Condition
field is part of the ChangeOfCharCondition element in the List of
Traffic Volumes. It defines the reason for closing the container:
Supported values:
- qoSChange
0
- tariffTime
1
- recordClosure 2
|
Enumerated integer
|
1
|
85
|
Change time
|
15-0-6
|
M
|
Change Time is a time
stamp, which defines the moment when the volume container is closed
or the CDR is closed.
|
BCD encoded octet string
|
6
|
86
|
Record Opening Time
|
16
|
M
|
This field contains
the time stamp when a PDP context is activated in SGSN or when a subsequent
record is opened after a partial record. The timestamp is determined
based on the internal timer which has an accuracy of 10ms.
|
BCD encoded octet string
|
6
|
90
|
Duration
|
17
|
M
|
|
Integer
|
1 - 5
|
91
|
SGSN Change
|
18
|
O
|
This field is present
only in the S-CDR to indicate that this it is the first record after
an inter-SGSN routing area update.
|
Boolean
|
1
|
92
|
Cause for Record Closing
|
19
|
M
|
This field contains
a reason for the closure of the CDR.
|
Integer
|
1
|
93
|
DiagnosticsSM
|
20
|
O
|
This field contains
the system internal reasons for the PDP context deactivation at
Session Management Level.
|
Choice
|
3
|
B4
|
gsm0408Cause
|
20 - 0
|
M
|
This cause is used
in the Diagnostics field.
|
Integer
|
1
|
80
|
Record Sequence Number
|
21
|
O
|
A running sequence
number with range 1-4294967295 used to link partial records generated
by the SGSN for a specific PDP context (characterized with the same
Charging ID and GGSN address). This field is not present if the
first record is also the final record.
|
Integer
|
1 - 5
|
95
|
Node ID
|
22
|
O
|
This field contains
an identifier string for the node that had generated the CDR.
|
IA5 string
|
5 - 20
|
96
|
Record Extensions
|
23
|
O
|
|
Set
|
1 - n
|
97
|
Local Record Sequence Number
|
24
|
O
|
For each Node ID, this
number with range 1 - 4294967295 is allocated sequentially for each CDR.
This along with a Node ID uniquely identifies a CDR. This field
is only included when the option gtpp attribute local-record-sequence
number is configured. By configuring gtpp single-source centralized-lrsn-creation the local
record sequence number will be incremented for S-CDRs.
|
Octet string
|
1 - 5
|
98
|
APN Selection Mode
|
25
|
O
|
This field indicates
how the APN was selected.
|
Enumerated integer
|
1
|
99
|
Access Point Name Operator Identifier
|
26
|
M
|
This field contains
the Operator Identifier part of the Access Point Name (APN).
|
IA5 string
|
1 - 37
|
9a
|
Served MSISDN
|
27
|
O
|
The field tracks the
Mobile Station (MS) ISDN number (MSISDN) of the subscriber which
is transparently copied from the Create PDP Context Request message.
|
BCD encoded octet string
|
1 - 9
|
9b
|
Charging Characteristics
|
28
|
M
|
Lists the charging characteristics
applied to the PDP context by the SGSN.
|
Hex value octet string
|
2
|
9c
|
Rat Type
|
29
|
O
|
This field indicates
the Radio Access Technology (RAT) type currently used by the Mobile Station.
|
Integer
|
1
|
9d
|
cAMELInformationPDP
|
30
|
O
|
This field is supported
if Ge interface is supported. CLI gtpp attribute camel-info needs
to be enabled to populate this field.
|
|
1 - n
|
be
|
SCF Address
|
30-0
|
O
|
This identifier refers
to the network address (E.164 number) of the subscriber related SCP.
Address is defined in HLR as part of CAMEL subscription information.
The address is BCD encoded.
|
Address string
|
1 - 11
|
81
|
Service Key
|
30-1
|
O
|
This parameter describes
in case of usage of a CAMEL the service key. Service key is defined in
HLR as part of CAMEL subscription information.
|
Integer
|
1 - 5
|
82
|
defaultTransactionHandling
|
30-2
|
O
|
This field indicates
whether or not a CAMEL encountered a default GPRS-handling or SMS-handling.
This field will be present
only if default call handling has been applied. This parameter is
defined in HLR as part of CAMEL subscription information.
|
Enumerated integer
|
1
|
83
|
cAMELAccessPointNameNI
|
30-3
|
O
|
|
|
|
84
|
cAMELAccessPointNameOI
|
30-4
|
O
|
|
|
|
85
|
NumberOfDPEncountered
|
30-5
|
O
|
This field indicates
how many armed CAMEL detection points (TDP and EDP) were encountered
and complements "Level of CAMEL service" field.
|
Integer
|
1 - 5
|
86
|
Level Of Camel Service
|
30-6
|
O
|
This field describes
briefly the complexity of CAMEL invocation.
|
Bit string
|
2
|
87
|
freeFormatData
|
30-7
|
O
|
|
|
|
88
|
fFDAppendIndicator
|
30-8
|
O
|
|
|
|
89
|
RNC Unsent Volume
|
31
|
O
|
This field contains
the unsent downlink (from RNC to MS) data volume in bytes.
|
Integer
|
1 - 5
|
9f1f
|
Charging Characteristics
Selection Mode
|
32
|
O
|
This field specifies
how the Charging Characteristics was selected
|
Enumerated integer
|
1
|
9f20
|
Dynamic Address Flag
|
33
|
O
|
This field indicates
that the PDP address has been dynamically allocated for that particular
PDP context.
|
Boolean
|
1
|
9f21
|
iMSIunauthenticatedFlag
|
34
|
O
|
|
Null
|
0
|
9f22
|
userCSGInformation
|
35
|
O
|
|
|
N/A
|
9f23
|
Served PDP PDN Address Extension
|
36
|
O
|
This field contains
the IPv4 address for the PDP connection (PDP context, IP-CAN bearer)
when dual-stack IPv4 IPv6 is used, and the IPv6 adress is included
in Served PDP Address or Served PDP/PDN Address. This field
is missing if the PDP/PDN address is IPv4 or IPv6.
|
|
|
bf24
|
PDP IP Address
|
36-0
|
M
|
This field contains
the IP address for the PDP context.
|
Choice
|
6 (IPV4)
|
0xa0
|
PDP IPv4 Binary Address
|
36-0-0
|
M
|
The octet string included
in the field described above includes the IPv4 address assigned
to the subscriber by of the GGSN in binary coding.
|
Octet string
|
4 (IPV4)
|
0x80
|
Low Access Priority Indicator
|
37
|
O
|
This field indicates
if the PDN connection has a low priority, i.e. for Machine Type Communication.
|
Null
|
0
|
9f25
|