PCC-Service Addon
Configuration Mode Commands
The PCC-Service Configuration
Mode is used to link, consolidate and manage the policy logic for
the network. It defines the authorization of resources for a subscriber's
data usage under various conditions and policies in the PCC-service.
Important: This
configuration mode is supported from StarOS Release 15.0 onwards.
Important: The commands or keywords/variables
that are available are dependent on platform type, product version,
and installed license(s).
associate-addon-state
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC
Service Configuration > Addon Configuration
configure > context
context_name
> pcc-service
service_name>
addon
addon_name
Syntax
Syntax Description
associate-addon-state {expired | grace | not-started | started} {action-set act_set_name [notification-template not_temp_name] | notification-template not_temp_name}
no associate-addon-state {expired | grace | not-started | started}
no
Removes the configured associated addon state from this PCC service
addon instance for IPCF configuration.
action-set
act_set_name
The
act_set_name must be an alphanumerical string
from 1 through 63 characters.
notification-template
not_temp_name
Usage Guidelines
Use this command to create/remove/configure an action-set in a
PCC-service instance for IPCF Configuration.
An Action-set indicates the policy and charging as well as event
generation related decisions that will get activated when the corresponding
Condition-Group is evaluated to
TRUE within a subscriber policy/profile.
A maximum of 512 PCC-Action-Sets can be configured in 1 instance of
PCC-Service.
Entering this command results in the following prompt:
[context_name]hostname(config-pcc-action-set)
Important:
For more information on PCC-Action-Set configuration, refer
PCC-Action-Set Configuration Mode Commands.
Example
Following command creates a PCC-action-set named
pcc_act1 with in a PCC-service.
action-set pcc_act1
Following command removes a pre-configured PCC-action-set named
pcc_act1 from a PCC-service.
no action-set pcc_act1
description
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC
Service Configuration > Addon Configuration
configure > context
context_name
> pcc-service
service_name>
addon
addon_name
Syntax
Syntax Description
action-set act_set_name [-noconfirm]
no action-set act_set_name
no
Removes the configured PCC-Action-Set from this PCC-service instance
for IPCF configuration.
act_set_name
Identifies the name of the PCC-Action-Set which is to be created or
modified through this command.
The
act_set_name must be an alphanumerical string
from 1 through 63 characters.
-noconfirm
Indicates that the command is to execute
without any additional prompt and confirmation from the user.
Usage Guidelines
Use this command to create/remove/configure an action-set in a
PCC-service instance for IPCF Configuration.
An Action-set indicates the policy and charging as well as event
generation related decisions that will get activated when the corresponding
Condition-Group is evaluated to
TRUE within a subscriber policy/profile.
A maximum of 512 PCC-Action-Sets can be configured in 1 instance of
PCC-Service.
Entering this command results in the following prompt:
[context_name]hostname(config-pcc-action-set)
Important:
For more information on PCC-Action-Set configuration, refer
PCC-Action-Set Configuration Mode Commands.
Example
Following command creates a PCC-action-set named
pcc_act1 with in a PCC-service.
action-set pcc_act1
Following command removes a pre-configured PCC-action-set named
pcc_act1 from a PCC-service.
no action-set pcc_act1
duration
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC
Service Configuration > Addon Configuration
configure > context
context_name
> pcc-service
service_name>
addon
addon_name
Syntax
Syntax Description
action-set act_set_name [-noconfirm]
no action-set act_set_name
no
Removes the configured PCC-Action-Set from this PCC-service instance
for IPCF configuration.
act_set_name
Identifies the name of the PCC-Action-Set which is to be created or
modified through this command.
The
act_set_name must be an alphanumerical string
from 1 through 63 characters.
-noconfirm
Indicates that the command is to execute
without any additional prompt and confirmation from the user.
Usage Guidelines
Use this command to create/remove/configure an action-set in a
PCC-service instance for IPCF Configuration.
An Action-set indicates the policy and charging as well as event
generation related decisions that will get activated when the corresponding
Condition-Group is evaluated to
TRUE within a subscriber policy/profile.
A maximum of 512 PCC-Action-Sets can be configured in 1 instance of
PCC-Service.
Entering this command results in the following prompt:
[context_name]hostname(config-pcc-action-set)
Important:
For more information on PCC-Action-Set configuration, refer
PCC-Action-Set Configuration Mode Commands.
Example
Following command creates a PCC-action-set named
pcc_act1 with in a PCC-service.
action-set pcc_act1
Following command removes a pre-configured PCC-action-set named
pcc_act1 from a PCC-service.
no action-set pcc_act1
end
Exits the current
configuration mode and returns to the Exec mode.
Privilege
Security Administrator,
Administrator
Syntax
Syntax Description
end
Usage Guidelines
Use this command to
return to the Exec mode.
exit
Exits the current
mode and returns to the parent configuration mode.
Privilege
Security Administrator,
Administrator
Syntax
Syntax Description
exit
Usage Guidelines
Use this command to
return to the parent configuration mode.
status active
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC
Service Configuration > Addon Configuration
configure > context
context_name
> pcc-service
service_name>
addon
addon_name
Syntax
Syntax Description
action-set act_set_name [-noconfirm]
no action-set act_set_name
no
Removes the configured PCC-Action-Set from this PCC-service instance
for IPCF configuration.
act_set_name
Identifies the name of the PCC-Action-Set which is to be created or
modified through this command.
The
act_set_name must be an alphanumerical string
from 1 through 63 characters.
-noconfirm
Indicates that the command is to execute
without any additional prompt and confirmation from the user.
Usage Guidelines
Use this command to create/remove/configure an action-set in a
PCC-service instance for IPCF Configuration.
An Action-set indicates the policy and charging as well as event
generation related decisions that will get activated when the corresponding
Condition-Group is evaluated to
TRUE within a subscriber policy/profile.
A maximum of 512 PCC-Action-Sets can be configured in 1 instance of
PCC-Service.
Entering this command results in the following prompt:
[context_name]hostname(config-pcc-action-set)
Important:
For more information on PCC-Action-Set configuration, refer
PCC-Action-Set Configuration Mode Commands.
Example
Following command creates a PCC-action-set named
pcc_act1 with in a PCC-service.
action-set pcc_act1
Following command removes a pre-configured PCC-action-set named
pcc_act1 from a PCC-service.
no action-set pcc_act1
time-allowance
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC
Service Configuration > Addon Configuration
configure > context
context_name
> pcc-service
service_name>
addon
addon_name
Syntax
Syntax Description
action-set act_set_name [-noconfirm]
no action-set act_set_name
no
Removes the configured PCC-Action-Set from this PCC-service instance
for IPCF configuration.
act_set_name
Identifies the name of the PCC-Action-Set which is to be created or
modified through this command.
The
act_set_name must be an alphanumerical string
from 1 through 63 characters.
-noconfirm
Indicates that the command is to execute
without any additional prompt and confirmation from the user.
Usage Guidelines
Use this command to create/remove/configure an action-set in a
PCC-service instance for IPCF Configuration.
An Action-set indicates the policy and charging as well as event
generation related decisions that will get activated when the corresponding
Condition-Group is evaluated to
TRUE within a subscriber policy/profile.
A maximum of 512 PCC-Action-Sets can be configured in 1 instance of
PCC-Service.
Entering this command results in the following prompt:
[context_name]hostname(config-pcc-action-set)
Important:
For more information on PCC-Action-Set configuration, refer
PCC-Action-Set Configuration Mode Commands.
Example
Following command creates a PCC-action-set named
pcc_act1 with in a PCC-service.
action-set pcc_act1
Following command removes a pre-configured PCC-action-set named
pcc_act1 from a PCC-service.
no action-set pcc_act1
volume-allowance
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC
Service Configuration > Addon Configuration
configure > context
context_name
> pcc-service
service_name>
addon
addon_name
Syntax
Syntax Description
action-set act_set_name [-noconfirm]
no action-set act_set_name
no
Removes the configured PCC-Action-Set from this PCC-service instance
for IPCF configuration.
act_set_name
Identifies the name of the PCC-Action-Set which is to be created or
modified through this command.
The
act_set_name must be an alphanumerical string
from 1 through 63 characters.
-noconfirm
Indicates that the command is to execute
without any additional prompt and confirmation from the user.
Usage Guidelines
Use this command to create/remove/configure an action-set in a
PCC-service instance for IPCF Configuration.
An Action-set indicates the policy and charging as well as event
generation related decisions that will get activated when the corresponding
Condition-Group is evaluated to
TRUE within a subscriber policy/profile.
A maximum of 512 PCC-Action-Sets can be configured in 1 instance of
PCC-Service.
Entering this command results in the following prompt:
[context_name]hostname(config-pcc-action-set)
Important:
For more information on PCC-Action-Set configuration, refer
PCC-Action-Set Configuration Mode Commands.
Example
Following command creates a PCC-action-set named
pcc_act1 with in a PCC-service.
action-set pcc_act1
Following command removes a pre-configured PCC-action-set named
pcc_act1 from a PCC-service.
no action-set pcc_act1