CS Network name

Indicates the name of the Circuit Switched (CS) network instance for which status is displayed.

Associated SCCP-Network

Indicates the name of the Signalling Connection Control Part (SCCP) network service instance which in associated with referecned CS network instance.

Associated Alcap-Service

Indicates the name of the Access Link Control Application Protocol (ALCAP) service instance which in associated with referecned CS network instance.

Alcap Context Name

Indicates the name of the context in which ALCAP service instance is configured.

Associated RTP Pool

Indicates the name of the RTP IP pool configured and associated with referecned CS network instance for RTP stream management.

RTP Pool Context Name

Indicates the name of the context in which RTP IP pool is configured for RTP stream management.

MSC Point Code

Indicates the address of MSC in SS7 point code notation which is serving the referenced CS network instance.

Status

Indicates the status of MSC which is serving the referenced CS network instance.

Network Status

Indicates the status of network in which the referenced CS network instance is placed.

RTP IP Addresses

Indicates the session manager instances and associated IP pools with them for RTP stream management support.

NRI

Indicates the Network Resource Identication (NRI) bit configuration status for the referenced CS network.

IDNNS

Indicates the Intra-Domain NAS Node Selector (IDNNS) configuration status for the referenced CS network to transport the NRI value.

Lac range <nnn> to <nnn> MSC Point-code <x.x.x>

Indicates the mapping configured between MSC point-code and range of LAC for multiple MSC selection without Iu-Flex in CS network.

CORE NODE MAP

Indicates the core node mapping configuration status for the referenced CS network.

Initiated Ranap Reset

Indicates if the HNB-GW Initiated RANAP Reset function is enabled or disabled.

Ranap Reset Ack Timer

The timer value, in seconds, that defines how long the HNB-GW waits for a RESET ACK message from the MSC after transmitting a RESET message. This setting is used only if the HNB-GW Initiated RANAP Reset function is enabled.

Ranap Reset Maximum Retransmissions

Sets the maximum number of retries allowed for the HNB-GW to transmit a RANAP RESET message to the MSC if the RESET ACK timer expires. This setting is used only if the HNB-GW Initiated RANAP Reset function is enabled.

Ranap Reset Guard Timer

The timer that the HNB-GW starts after receiving a RESET message from the CS core network. While this timer is running, the HNB-GW discards any new RESET messages that it receives.

Global RNC-Id

This group displays the information related to global Radio Network Controller settings for use by the CS core network for HNB-GW service(s) on a chassis. It is configured under the PLMN-ID.

MCC

The Mobile Country Code defined for use with this HNB-GW service. It consists of the first 3 digits of the Available Radio Network PLMN ID.

MNC

The Mobile Network Code defined for use with this HNB-GW service. It consists of the last 3 digits of the Available Radio Network PLMN ID.

Id

The Radio Network Controller ID provided to HNBs for use by the CS core network for this HNB-GW service. It is configured under the PLMN-ID

RANAP

This group displays the statistics of RANAP in a CS network on chassis.

Initial UE Tx

Total number of initial UE requests transmitted.

Direct Transfer Rx

Total number of Direct Transfer requests received.

Direct Transfer Tx

Total number of Direct Transfer responses sent.

Reset Rx

Total number of RESET requests received.

Reset Tx

Total number of RESET responses sent.

Reset Ack Rx

Total number of RESET Ack requests received.

Reset Ack Tx

Total number of responses against RESET Ack request sent.

Reset Resource Rx

Total number of RESET RESOURCE requests received.

Reset Resource Tx

Total number of RESET RESOURCE responses sent.

Reset Resource Ack Rx

Total number of RESET RESOURCE Ack requests received.

Reset Resource Ack Tx

Total number of responses against RESET RESOURCE Ack request sent.

Iu Release Request Tx

Total number of Iu RELEASE requests sent.

Iu Release Command Rx

Total number of Iu RELEASE command received.

Iu Release Complete Tx

Total number of Iu RELEASE Complete response sent.

Paging Request Rx

Total number of Paging rquests received.

RAB Assignment Request Rx

Total number of RAB assignment requests received.

RAB Setup/Mod Rx

Total number of RAB setup or modification requests received.

RAB Release Rx

Total number of RAB Release requests received.

RAB Assignment Response Tx

Total number of responses against RAB assignment requests sent.

RAB Setup/Mod Success Tx

Total number of RAB setup or modification Success response sent.

Total RAB Setup/Mod Fail Tx

Total number of RAB setup or modification Fail response sent.

RAB Setup/Mod Fail(Local) Tx

Total number of RAB setup or modification Fail response sent where RAB setup or modification failed due to local reason/cause.

RAB Release Success Tx

Total number of RAB Release Success response sent.

Total RAB Release Fail Tx

Total number of RAB Release Success response sent.

RAB Release Fail(Local) Tx

Total number of RAB Release Fail response sent where RAB Release failed due to local reason/cause.

RAB Queued Tx

Total number of RAB messages quesed for transmission.

RAB Setup/Mod Timer Exp

Total number of instances where RAB setup/modification timer expired before process of request.

RAB Release Timer Exp

Total number of instances where RAB Reelase timer expired before process of request.

RAB Set/Mod/Rel Local Fail

This group displays the total number of RAB setup or modification or release requests failed due to local reason/cause.

Local Failure Cause

This group idendifies the local cause for RAB setup or modification or release request failure.

Radio Network Layer Cause

This group idendifies the total number of RAB setup or modification or release request failure due to error in radio network layer.

Invalid Rab Id

Total number of RAB setup or modification or release requests failed due to invalid RAB id in radio network layer.

Interaction With Other Proc

Total number of RAB setup or modification or release requests failed as system was interacting with another process.

Transport Layer Cause

This group idendifies the total number of RAB setup or modification or release request failure due to error in Transport layer.

Sig Trans Res Fail

Total number of RAB setup or modification or release requests failed due to Sig trans Resource failure in transport layer.

Iu Tran Conn failed to Estab

Total number of RAB setup or modification or release requests failed where Iu Transmission connection failed to establish in transport layer.

Protocol Layer Cause

This group idendifies the total number of RAB setup or modification or release request failure due to error in Protocol layer.

Transfer syntax error

Total number of RAB setup or modification or release requests failed due to transfer syntax error in Protocol layer.

Asn error(Reject)

Total number of RAB setup or modification or release requests failed due to ASN (Reject) syntax error in Protocol layer.

Asn error

Total number of RAB setup or modification or release requests failed due to ASN syntax error in Protocol layer.

Msg not comp with Rcvr state

Total number of RAB setup or modification or release requests failed as message was not compatible with Recovery state in Protocol layer.

Semantic error

Total number of RAB setup or modification or release requests failed due to semantic error in Protocol layer.

Asn error(Falsely const msg)

Total number of RAB setup or modification or release requests failed due to ASN error (falsely constructed messages) in Protocol layer.

Miscellaneous Cause

This group idendifies the total number of RAB setup or modification or release request failure due to miscellaneous cause (not listed in this table).

No Resource Available

Total number of RAB setup or modification or release requests failed due to non availability of resourcse.

Unspecified

Total number of RAB setup or modification or release request failure due to sunspecified cause (not listed in this table).

<codec_name> Codec

This group displays the total number of RAB setup or modification or release request failure grouped in Codec name <codec_name>.

RAB Setup/Mod Rx

Total number of RAB setup or modification requests received for specific codec.

RAB Setup/Mod Success Tx

Total number of RAB setup or modification sucess messages sent for specific codec.

RAB Release Rx

Total number of RAB Release requests received for specific codec.

Total RAB Setup/Mod Fail Tx

Total number of RAB setup or modification failure messages sent for specific codec.

RAB Setup/Mod Fail(Local) Tx

Total number of RAB setup or modification failure messages sent for specific codec where RAB setup or modification failed due to local reason/cause.

RAB Release Success Tx

Total number of RAB Release success messages sent for specific codec.

Total RAB Release Fail Tx

Total number of RAB Release fail messages sent for specific codec.

RAB Release Fail(Local) Tx

Total number of RAB Release fail messages sent for specific codec where RAB setup or modification failed due to local reason/cause.

RAB Queued Tx

Total number of RAB messages queued for processing or transmission.

Relocation Request Rx

Total number of RAB Relocation request received by system for this CS network.

RAB Setup Rx

Total number of RAB Relocation setup request received by system for this CS network.

Relocation Request ACK Tx

Total number of RAB Relocation Ack messages sent agains setup request received by system for this CS network.

RAB Setup Success Tx

Total number of RAB setup success messages sent agains setup request received by system for this CS network.

Total RAB Setup Fail Tx

Total number of RAB setup fail messages sent agains setup request received by system for this CS network.

RAB Setup Fail(Local) Tx

Total number of RAB setup failure messages sent from this system where RAB setup or modification failed due to local reason/cause.

Local Failure Cause

This group idendifies the local cause for RAB setup or modification or release request failure.

Radio Network Layer Cause

This group idendifies the total number of RAB setup or modification or release request failure due to error in radio network layer.

Invalid Rab Id

Total number of RAB setup or modification or release requests failed due to invalid RAB id in radio network layer.

Interaction With Other Proc

Total number of RAB setup or modification or release requests failed as system was interacting with another process.

Transport Layer Cause

This group idendifies the total number of RAB setup or modification or release request failure due to error in Transport layer.

Sig Trans Res Fail

Total number of RAB setup or modification or release requests failed due to Sig trans Resource failure in transport layer.

Iu Tran Conn failed to Estab

Total number of RAB setup or modification or release requests failed where Iu Transmission connection failed to establish in transport layer.

Protocol Layer Cause

This group idendifies the total number of RAB setup or modification or release request failure due to error in Protocol layer.

Transfer syntax error

Total number of RAB setup or modification or release requests failed due to transfer syntax error in Protocol layer.

Asn error(Reject)

Total number of RAB setup or modification or release requests failed due to ASN (Reject) syntax error in Protocol layer.

Asn error

Total number of RAB setup or modification or release requests failed due to ASN syntax error in Protocol layer.

Msg not comp with Rcvr state

Total number of RAB setup or modification or release requests failed as message was not compatible with Recovery state in Protocol layer.

Semantic error

Total number of RAB setup or modification or release requests failed due to semantic error in Protocol layer.

Asn error(Falsely const msg)

Total number of RAB setup or modification or release requests failed due to ASN error (falsely constructed messages) in Protocol layer.

Miscellaneous Cause

This group idendifies the total number of RAB setup or modification or release request failure due to miscellaneous cause (not listed in this table).

No Resource Available

Total number of RAB setup or modification or release requests failed due to non availability of resourcse.

Unspecified

Total number of RAB setup or modification or release request failure due to sunspecified cause (not listed in this table).

<codec_name> Codec

This group displays the total number of RAB Setup request grouped in Codec name <codec_name>.

RAB Setup Rx

Total number of RAB setup requests received for specific codec.

RAB Setup Success Tx

Total number of RAB setup sucess messages sent for specific codec.

Total RAB Setup Fail Tx

Total number of RAB setup failure messages sent for specific codec.

RAB Setup Fail(Local) Tx

Total number of RAB setup failure messages sent for specific codec where RAB setup failed due to local reason/cause.

Relocation Detect Tx

Total number of RAB Relocation Detect messages sent by system in this CS network.

Relocation Required Tx

Total number of RAB Relocation Required request messages sent by system in this CS network.

Fwd SRNS Context Request Tx

Total number of FWD SRNS Context request messages sent by system in this CS network.

Relocation Prep Failure Rx

Total number of Relocation Preparation failure response messages sent by system in this CS network.

Relocation Cancel Tx

Total number of Relocation cancle command messages received by system in this CS network.

Relocation Command Rx

Total number of Relocation command messages received by system in this CS network.

Srns Context Request Rx

Total number of SRNS Context Request messages received by system in this CS network.

Srns Context Response Tx

Total number of response sent for SRNS Context Request messages received by system in this CS network.

SCCP

This group displays the statistics of SCCP in a CS network on chassis.

SCCP Connection Request Rx

Total number of SCCP connection Request received by HNB-GW from the Core Node.

This counter changes when Core Node initiates SCCP connection during Relocation.

SCCP Connection Request Tx

Total number of SCCP connection Request sent by HNB-GW towards the CN after getting RUA Connect Request for a Registered UE.

This counter changes when RUA Connect Request sent for a Registered UE.

SCCP Connection Confirm Rx

Total number of SCCP Connection Confirmation messages received by HNB-GW from the Core Node.

This counter changes when CN sends the SCCP connection confirmation for a requested SCCP Connection Request.

SCCP Connection Confirm Tx

Total number of SCCP Connection Confirmation response messages sent by HNB-GW to the Core Node.

This counter changes when HNB-GW sends the SCCP connection confirmation response for a requested SCCP Connection Request to CN.

SCCP Connection Reject Rx

Total number of SCCP Connection Reject messages received by HNB-GW from the Core Node.

This counter changes when Core node Rejects the SCCP Conn Request due to some parameter mismatch, etc.

SCCP Connection Reject Tx

Total number of SCCP Connection Rejection response messages sent by HNB-GW to the Core Node.

This counter changes when HNBGW initiates the tear Down on receiving RUA disconnect from HNB which doesn't contain RANAP Iu-release complete message and other failure scenarios.

SCCP Connection Data Rx

Total data received by HNB-GW over SCCP connection between HNB-GW and Core Node.

This counter changes when CN sends the data towards HNB-GW over SCCP connection.

SCCP Connection Data Tx

Total data sent by HNB-GW over SCCP connection between HNB-GW and Core Node.

This counter changes when HNB-GW sends the data towards CN over SCCP connection.

SCCP Disconnect Rx

Total number of SCCP Disconnect messages received by HNB-GW from Core Node.

This counter changes when CN initiate tear-down procedure for SCCP connection.

SCCP Disconnect Tx

Total number of SCCP Disconnect response messages sent by HNB-GW to Core Node.

This counter changes when HNBGW initiates the tear-down procedure on receiving RUA disconnect from HNB which doesn't contain RANAP Iu-release complete message and other failure scenarios.

SCCP Uni Data Rx

Total Connection-less data, like paging, received by HNB-GW over SCCP connection between HNB-GW and Core Node.

This counter changes when CN sends any connection-less data, like paging, towards HNB-GW over SCCP connection.

SCCP Uni Data Tx

Total Connection-less data, RANAP Reset, RANAP reset Resource, sent by HNB-GW over SCCP connection between HNB-GW and Core Node.

This counter changes when HNB-GW sends or forward any Connection-less data, like RANAP reset, RANAP Reset Resource, towards CN over SCCP connection.