- About this Guide
- Introduction to VPC-DI
- VPC-DI Installation Notes
- System Operation and Configuration
- Getting Started
- System Settings
- Config Mode Lock Mechanisms
- Management Settings
- Verifying and Saving Your Configuration
- System Interfaces and Ports
- System Security
- Secure System Configuration File
- Software Management Operations
- Smart Licensing
- Monitoring the System
- Bulk Statistics
- System Logs
- Troubleshooting
- Packet Capture (PCAP) Trace
- System Recovery
- Access Control Lists
- Congestion Control
- Routing
- VLANs
- BGP MPLS VPNs
- Content Service Steering
- Session Recovery
- Interchassis Session Recovery
- Support Data Collector
- Engineering Rules
- StarOS Tasks
- NETCONF and ConfD
- ICSR Checkpointing
- VPC-DI SDR CLI Command Strings
- VPC Commands
About this Guide
This preface describes the VPC-DI System Administration Guide, how it is organized and its document conventions.
Cisco Virtualized Packet Core Distributed Instance (VPC-DI) consists of a fully distributed network of multiple virtual machines (VMs) grouped to form a single StarOS instance with VMs performing management, input/output (I/O), and packet processing. The VMs run on commercial off-the-shelf (COTS) servers. This guide describes how to configure and administer the various components of the VPC-DI.
Note | The current release does not comply fully with Cisco’s Security Development Lifecycle. Cisco has analyzed and identified the security vulnerabilities related to this release and closed the high-impacting vulnerabilities. Vulnerabilities will be disclosed in accordance with Cisco’s Security Vulnerability Policy. |
This guide describes how to generally configure and maintain StarOS running on an virtualized platform. It also includes information on monitoring system performance and troubleshooting. Supplemental information related to general StarOS operation and supported network gateway functions can be found in the StarOS documentation.
Conventions Used
The following tables describe the conventions used throughout this documentation.
Notice Type | Description |
---|---|
Information Note |
Provides information about important features or instructions. |
Caution |
Alerts you of potential damage to a program, device, or system. |
Warning |
Alerts you of potential personal injury or fatality. May also alert you of potential electrical hazards. |
Typeface Conventions | Description |
---|---|
Text represented as a screen display |
This typeface represents displays that appear on your terminal screen, for example: Login: |
Text represented as commands |
This typeface represents commands that you enter, for example: show ip access-list This document always gives the full form of a command in lowercase letters. Commands are not case sensitive. |
Text represented as a command variable |
This typeface represents a variable that is part of a command, for example: show card slot_number slot_number is a variable representing the desired chassis slot number. |
Text represented as menu or sub-menu names |
This typeface represents menus and sub-menus that you access within a software application, for example: Click the File menu, then click New |
Related Documentation
The most up-to-date information for this product is available in the product Release Notes provided with each software release.
The following user documents are available on www.cisco.com:
- AAA Interface Administration and Reference
- Command Line Interface Reference
- GTPP Interface Administration and Reference
- IPSec Reference
- Release Change Reference
- SNMP MIB Reference
- Statistics and Counters Reference
- Thresholding Configuration Guide
- Product-specific and feature-specific Administration guides
Contacting Customer Support
Use the information in this section to contact customer support.
Refer to the support area of http://www.cisco.com for up-to-date product documentation or to submit a service request. A valid username and password are required to access this site. Please contact your Cisco sales or service representative for additional information.