Verifying and Saving Your Interface and Port Configuration
show ip interface
Intf Name: LOCAL1 Intf Type: Broadcast Description: management1 VRF: None IP State: UP (Bound to 1/1 untagged, ifIndex 16842753) IP Address: 192.168.100.3 Subnet Mask: 255.255.255.0 Bcast Address: 192.168.100.255 MTU: 1500 Resoln Type: ARP ARP timeout: 60 secs L3 monitor LC-port switchover: Disabled Number of Secondary Addresses: 0
show configuration port slot/port
For VPC-DI, the slot corresponds to a CF or SF VM. The hypervisor assigns a unique slot number to each VM during initial configuration of the VPC-DI instance. Slots 1 and 2 are assigned to the CF VMs slot numbers 3 through 32 are assigned to SF VMs. Each SF supports four vNICs numbered 1 through 12 with corresponding virtual ethernet ports numbered 10 through 21. SF port number 10 must be configured.
config port ethernet 1/1 no shutdown bind interface LOCAL1 local
Save your configuration as described in the Verifying and Saving Your Configuration chapter.