system cpu utilization

Displays the current congestion-control configuration. If the demuxmgr exclusion is configured while calculating system CPU utilization, then relevant data regarding exclusion is mentioned in the output.

system memory utilization

Displays the current congestion-control configuration. If the demuxmgr exclusion is configured while calculating system memory utilization, then relevant data regarding exclusion is mentioned in the output.

connected-sessions-utilization

Displays the current congestion-control configuration. If the total connected session monitoring is configured, then the system wide connected session value is monitored.

Current congestion status

The current congestion control state as "Cleared" or "Applied".

Congestion applied

Displays the number of times the system invoked a congestion control policy for the specified service type.

Congestion Control Resource Limits

Indicates the congestion control threshold that was triggered. For more information, refer to the congestion-control threshold command in the Global Configuration Mode chapter of the Command Line Interface Reference.

current congestion status

The current congestion control state as "Cleared" or "Applied".

congestion applied

Displays the number of times the system invoked a congestion control policy for the specified service type.

congestion Control Resource Limits

Indicates the congestion control threshold that was triggered. For more information, refer to the congestion-control threshold command in the Global Configuration Mode chapter of the Command Line Interface Reference.

system cpu use exceeded

Indicates the number of time the ASNGW Manager exceeded the system CPU usage limit.

service cpu use exceeded

Indicates the number of time the ASNGW Manager exceeded the CPU usage limit specified for this service.

system memory use exceeded

Indicates the number of time the ASNGW Manager exceeded the allocated system memory usage limit.

port rx use exceeded

Indicates the number of time the ASNGW Manager exceeded the Rx port usage limit.

port tx use exceeded

Indicates the number of time the ASNGW Manager exceeded the Tx port usage limit.

port specific rx use exceeded

Indicates the number of time the ASNGW Manager exceeded the Rx port usage limit for a specific port number.

port specific tx use exceeded

Indicates the number of time the ASNGW Manager exceeded the Tx port usage limit for a specific port number.

max sess use exceeded

Indicates the number of time the ASNGW Manager exceeded the maximum session usage limit for a service.

license use exceeded

Indicates the number of time the ASNGW Manager exceeded the maximum license usage limit.

msg queue size use exceeded

Indicates the number of time the ASNGW Manager exceeded the message queue size usage.

msg queue wait time exceeded

Indicates the number of time the ASNGW Manager exceeded the message queue wait time.

license threshold exceeded

Indicates the number of time the ASNGW Manager exceeded the license threshold limit.

max sess threshold exceeded

Indicates the number of time the ASNGW Manager exceeded the maximum session threshold limit.

sessions disconnected due to overload disconnect

Indicates the total number of sessions disconnected due to overload.

demuxmgr cpu use

Displays the current congestion-control statistics. If a congestion policy is applied, then an entry is made for the resource types with congestion applied.

connected sess threshold exceeded

Displays the current congestion-control statistics. If there is a congestion applied, then an entry is made for the resource types with congestion applied.

Critical/Major/Minor Congestion Policy Action

This section provides statistics for the Critical, Major or Minor congestion policy actions that were triggered for the MME.

Congestion Policy Applied

Displays the number of times the system invoked a congestion control policy.

PS attaches Rejected/Dropped

Indicates the number of packet switched Attach requests that were rejected/dropped.

Combined attaches Rejected/Dropped

Indicates the number of Combined Attach requests that were rejected/dropped.

S1-Setup Rejected/Dropped

Indicates the number of S1-Setup attempts that were rejected/dropped.

Handover Rejected/Dropped

Indicates the number of handover attempts that were rejected/dropped.

Addn-pdn-connect Rejected/Dropped

Indicates the number of additional PDN context connection attempts that were rejected/dropped.

Addn-brr-connect Rejected/Dropped

Indicates the number of additional Bearer Resource Requests that were rejected/dropped.

Brr-ctxt-mod-request Rejected/Dropped

Indicates the number of Bearer Resource Context Modification Requests dropped or rejected during a congestion condition.

Service-Request Rejected/Dropped

Indicates the number of service requests that were rejected/dropped.

TAU-Request Rejected/Dropped

Indicates the number of TAU requests that were rejected/dropped.

S1AP Overload Start Sent

Indicates the number of S1AP Overload Start messages that were sent.

S1AP Overload Stop Sent

Indicates the number of S1AP Overload Stop messages that were sent.

Excluded Emergency Events

Indicates the number of emergency events that were excluded from the Congestion Control policy based on the configuration of the exclude-emergency-events command. These events were allowed to proceed during a congestion condition.

Excluded Voice Events

Indicates the number of voice calls that were excluded from the Congestion Control policy based on the configuration of the exclude-voice-events command. These calls were allowed to proceed when a congestion condition.