AAL2 Channels Counters

This group displays the counter statistics of AAL2 channels in ALCAP service.

Number of AAL2 channels in IDLE state

Indicates the total number of AAL2 channels in IDLE state in ALCAP service instance.

Number of AAL2 channels in CONNECTED state

Indicates the total number of AAL2 channels in CONNECTED state in ALCAP service instance.

Number of AAL2 channels in CONNECTING state

Indicates the total number of AAL2 channels in CONNECTING state.

Number of AAL2 channels in RELEASE PENDING state

Indicates the total number of AAL2 channels in RELEASE PENDING state.

Number of AAL2 channels in RESET PENDING state

Indicates the total number of AAL2 channels in RESET PENDING state.

AAL2 Paths Counters

This group displays the counter statistics of AAL2 paths in paticular AAL2 channel in ALCAP service.

Number of AAL2 Paths in LOCALLY BLOCKED state

Indicates the total number of AAL2 paths in the AAL2 node that are currently blocked locally.

Number of AAL2 Paths in REMOTE BLOCKED state

Indicates the total number of AAL2 paths in the AAL2 node that are currently blocked by remote peer node.

Number of AAL2 Paths in BLOCKED state

Indicates the total number of AAL2 paths in the AAL2 node that are currently blocked. This includes both, local and remote blocks.

Number of AAL2 Paths in RESET PENDING state

Indicates the total number of AAL2 Paths in RESET PENDING state.

Aal2 node

The name of the ALCAP service node in which the ALCAP service is configured.

Aal2 node id

The identity number of the ALCAP node in which ALCAP service is configured.

Point code

Point code of adjacent AAL2 node in SS7 format address.

AESA

Specifies the ATM Endpoint Service Address (AESA) in an ATM (or AAL2) network to map with adjacent AAL2 node. The AESA is based on the generic network service access point (NSAP) format. The ATM connection from HNB-GW terminates at this point.

Total Aal2 Path

Indicates the total number of AAL2 paths configured for this ALCAP service on an AAL2 node.

Total Aal2 Path Blocked

Indicates the total number of AAL2 paths in the AAL2 node that are currently blocked. This includes both, local and remote blocks.

Total Aal2 Path Locally Blocked

Indicates the total number of AAL2 paths in the AAL2 node that are currently blocked locally.

Total Aal2 Path Remote Blocked

Indicates the total number of AAL2 paths in the AAL2 node that are currently blocked by remote peer node.

Aal2 Path info

This group displays the AAL2 path related information.

Aal2 Path id

Indicates the identity number of AAL2 path configured on this AAL2 node under ALCAP service.

ATM Port Bound

Indicates the status if the Aal2 path is bound to a physical ATM port or not.

LPort Id

Indicates the logical port Id identifying an Aal2 path binding to an ATM port.

Path FSM State

Indicates the current state of this AAL2 path FSM.

Locally Blocked

Indicates whether an AAL2 path on AAL2 node under ALCAP service is locally blocked or not.

Remote Blocked

Indicates whether an AAL2 path on AAL2 node under ALCAP service is remotely bolcked by peer node or not.

alcap service

The name of the ALCAP service of which statistics are displayed.

service id

The identity number of the ALCAP service of which statistics are displayed.

Context

Indicates the system context name in which ALCAP service is configured.

state

Indicates the state of the ALCAP service.

self point code

Indicates the address of this ALCAP service in SS7 point code notation.

ss7 routing domain id

Indicates the routing domain id in which ALCAP service is associated.

AAL2 Nodes

This group displays the information related to AAL2 node configured in ALCAP service.

Node name

Indicates the name of the AAL2 node configured in ALCAP service.

Point Code

Indicates the address of AAL2 node in SS7 point code notation.

Path id

Indicates the identity number of AAL2 path configured on this AAL2 node under ALCAP service.

Routes

This group displays the information related to AAL2 routes configured for AAL2 path.

AESA

Specifies the ATM Endpoint Service Address (AESA) in an ATM (or AAL2) network to map with adjacent AAL2 node. The AESA is based on the generic network service access point (NSAP) format. The ATM connection from HNB-GW terminates at this point.

Node id

Indicates the AAL2 node identity number used for routes in AAL2 path FSM.

ERQ timer

Indicates the maximum time, in seconds, configured for Timer_ERQ on the system to wait for response from adjacent AAL2 node before reporting the failure of AAL2 Establish Request procedure. Configurable range is from 5 through 30 seconds and default is 5 seconds.

REL timer

Indicates the maximum time, in seconds, configured for Timer_REL on the system to waits for response from adjacent AAL2 node before reporting the failure of AAL2 Release Request procedure. Configurable range is from 2 through 60 seconds and default is 2 seconds.

RES timer

Indicates the maximum time, in seconds, configured for Timer_RES on the system to waits for response from adjacent AAL2 node before reporting the failure of AAL2 Reset Request procedure. Configurable range is from 2 through 60 seconds and default is 2 seconds.

BLO timer

Indicates the maximum time, in seconds, configured for Timer_BLO on the system to waits for response from adjacent AAL2 node before reporting the failure of AAL2 Path Block procedure. Configurable range is from 2 through 60 seconds and default is 2 seconds.

UBL timer

Indicates the maximum time, in seconds, configured for Timer_UBL on the system to waits for response from adjacent AAL2 node before reporting the failure of AAL2 Path Un-Block procedure. Configurable range is from 2 through 60 seconds and default is 2 seconds.

MOD timer

Indicates the maximum time, in seconds, configured for Timer_MOD on the system to waits for response from adjacent AAL2 node before reporting the failure of AAL2 Path ModifyRequest procedure. Configurable range is from 5 through 30 seconds and default is 5 seconds.

STC long timer

Indicates the configured duration value in millinseconds for STC long timer. This timer is used by the congestion indication procedure. Receipt of a repeated congestion indication from MTP3B before the expiry of this timer is interpreted as the congestion situation. On the other hand, if no congestion indication is received from MTP3B before expiry of this timer, the congestion situation is considered to have improved. Configurable range is from 5000 ms through 10000 ms and default value is 5000 ms.

STC short timer

Indicates the configured duration value in millinseconds for STC long timer. This timer is used by the congestion indication procedure. The role of this timer is to avoid overreacting if multiple congestion indications are received from MTP3B in quick succession. Configurable range is from 300 ms through 600 ms and default value is 300 ms.

Max-reset-retransmission

Indicates maximum number of retries allowed for transmission of RESET message to reset the AAL2 path by ALCAP service. Configurable range is 0 to 4 and default is 1. A "0" value indicates that retransmission of RESET message is disabled.