organizes and describes various ASR5x00 non-SNMP-MIB forms of dynamic
statistics that are output by CLI
usually provide a greater degree of granularity than the bulk statistics
content is captured at the time the CLI command is entered,
output represents a single element, whereas bulk statistics are often a
combination of values for multiple elements,
output can be fine-tuned using keywords included in the
when it is entered.
The types of output
statistics are governed by the CLI
that generate their display. For example,
show power all
cards displays the current power status for each card in every
slot of the chassis.
Some of the
outputs display configuration information for reference purposes. For example,
show gs-service full name
<service_name> displays the configuration
for the named Gs service.
In Release 21.1
and forward, use the
do show command
to run all Exec Mode
commands while in Global Configuration Mode. It is not necessary to exit the
Config mode to run a
show command. The pipe character
| is only available if the command is valid
in the Exec mode.
Definitions and Disconnect Reasons
In this release, the
counters and descriptions are delivered with the companion package in the ASR
5x00 software build. The companion package includes files named
package includes two formats for the customers to use.
The .xls file is
an easily readable Excel file that can be used to sort and filter the counter
information based on schema or other factors.
The .csv file is
machine-readable and includes the same data as the .xls file.