end
Exits the current configuration mode and returns to the Exec mode.
Product
All
Privilege
Security Administrator, Administrator
Syntax
end
Usage Guidelines
Use this command to return to the Exec mode.
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The MEC TAI Group Configuration Mode is used to create and manage the MEC Tracking Area Identity supporting MME configurations on the system.
Exec > Global Configuration > LTE Policy Configuration > MEC TAI Group Configuration
configure > lte-policy > mec-tai-grp group_name
Entering the above command sequence results in the following prompt:
[local]host_name(mec-tai-grp)#
Important |
Available commands or keywords/variables vary based on platform type, product version, and installed license(s). |
Exits the current configuration mode and returns to the Exec mode.
All
Security Administrator, Administrator
end
Use this command to return to the Exec mode.
Exits the current mode and returns to the parent configuration mode.
All
Security Administrator, Administrator
exit
Use this command to return to the parent configuration mode.
Configures the Tracking Area Identity for MEC TAI Group .
MME
Administrator
Exec > Global Configuration > LTE Policy Configuration > LTE Emergency Profile Configuration
configure > lte-policy > mec-tai-grp grp_name
Entering the above command sequence results in the following prompt:
[local]host_name(mec-tai-grp)#
[ no ] tai mcc mcc_value mnc mnc_value { tac value1... value20 | tac-range from tac_value_from to tac_value_to }
Removes the configuration of tai.
Specifies the Tracking Area Identity.
Specifies the Mobile Country Code.mcc_value must be a three digit integer between 0 to 999.
Specifies the Mobile National Code.mnc_value must be a two / three digit integer between 00 to 999.
Specifies the Tracking Area Code. Upto 20 Tracking Area Codes can be entered on one line. It can be configured by entering TAC directly or using range. value1... value20 must be an integer between 0 to 65535.
Specifies the Range of Tracking Area Code. Maximum of 5 ranges in a MEC TAI group can be configured. tac_value_from and tac_value_to must be an integer between 0 to 65535.
Use this command to configure the Tracking Area Identity for MEC TAI Group.
tai mcc 50 mnc 45 tac-range from 10 to 20
Configures the up-address of User Plane Nodes Serving all TAIs in this object .
MME
Administrator
Exec > Global Configuration > LTE Policy Configuration > LTE Emergency Profile Configuration
configure > lte-policy > mec-tai-grp grp_name
Entering the above command sequence results in the following prompt:
[local]host_name(mec-tai-grp)#
[ no ] up-address ( IP-ADDRESS | IP-ADDRESS/MASK } mef-address iPV4/iPV6_address
Removes the addresses of User Plane Nodes Serving all TAIs in this object.
Specifies the Tracking Area Identity.Configures the addresses of User Plane Nodes Serving all TAIs in this Object. IP-ADDRESS must be an IPV4 ##.##.##.## or IPV6 ####:####:####:####:####:####:####:####. Also supports :: notation IP-ADDRESS/MASK must be an IPV4 ##.##.##.##/x or IPV6 ####:####:####:####:####:####:####:####/x.
Configures the peer MEF server address for MEF signalling.iPV4/iPV6_address must be IPV4 ##.##.##.## or IPV6 ####:####:####:####:####:####:####:#### (IPV6 also supports :: notation).
Use this command to configure the up-address of User Plane Nodes Serving all TAIs in this object.
up-address 11.22.43.65 mef-address 77.32.12.31