Release Change Reference, StarOS Release 21.15/Ultra Services Platform Release 6.9

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Release Change Reference, StarOS Release 21.15/Ultra Services Platform Release 6.9

Chapter Title

Adding Discrete eNB IDs to eNB Group in MME

Results

Updated:
August 29, 2019

Chapter: Adding Discrete eNB IDs to eNB Group in MME

Adding Discrete eNB IDs to eNB Group in MME

Feature Summary and Revision History

Summary Data

Applicable Product(s) or Functional Area

MME

Applicable Platform(s)

  • ASR 5500

  • VPC-DI

  • VPC-SI

Default Setting

Disabled - Configuration Required

Related Changes in This Release

Not Applicable

Related Documentation

  • Command Line Interface Reference

  • MME Administration Guide

  • Statistics and Counters Reference

Revision History

Revision Details

Release

eNB Group configuration recommendation note is added.

21.15

First introduced.

21.14

Feature Description


Important

This feature is not fully qualified in this release, and is available only for testing purposes. For more information, contact your Cisco Account representative.

When the discrete eNB IDs are added to the eNB group, the MME sends the relative MME capacity value, which is configured in that eNB group, in the S1 setup response to those eNBs. Whenever the relative MME capacity for that eNB group is changed, the MME sends the MME Configuration Update message to those eNBs configured in that eNB group.

Adding Discrete eNB IDs to eNB Group in MME

This section provides information on the newly introduced CLI commands to configure discrete eNB IDs to the eNB Group in MME.

Adding the eNB Group

Use the following configuration to configure discrete eNB IDs in the eNB group. 

configure  
   lte-policy  
      enb-group enb_group_name 
         global-enb-id  [ enbid-list enbid_list_name |  prefix network_identifier_name bits bits ]  
         end

NOTES:

  • enbid-list enbid_list_name : Specifies the eNB ID list with discrete eNB IDs. enbid_list_name must be a string of size 1 to 64.


    Important

    In an eNB Group, it is recommended to configure either Global eNB ID prefix or discrete eNB IDs, it is not recommended to configure both.

  • global-enb-id prefix network_identifier_name bits bits : Specifies the Global eNB ID prefix that contains a bit string which should be matched with Hexadecimal value.network_identifier_name , This must be a hexadecimal number between 0x0 and 0xFFFFFFF.


    Important

    A maximum of 20 eNB groups can be configured at a time.

Adding the eNB ID List in the eNB Group

Use the following commands to configure discrete eNB IDs to be used in the eNB group. 

configure  
   lte-policy  
      [ no ]enbid-list enbid_list_name 
         [ no ]  enb-id discrete_eNB_id | enb-id-range from starting_eNB_id  to ending_eNB_id  
         end

NOTES:

  • no : Disables the configuration of discrete eNB IDs.

  • enbid-list enbid_list_name : Specifies eNB ID list with discrete eNB IDs.enbid_list_name must be a string of size string of size 1 to 64.

  • enb-id discrete_eNB_id : Specifies the discrete eNB IDs. discrete_eNB_id must be a Hexadecimal number between 0x1 and 0xFFFFFFF.


    Important

    A maximum of 200 eNB IDs can be configured in an eNB id list. The enb-id-range can be a maximum of 64 per configured eNB ID list. However, if 200 eNB IDs are already configured, further enb-id-range configurations are not allowed. Duplicate eNB IDs per eNB ID list and across eNB ID list cannot be configured. Only two eNB ID lists can be configured such that discrete eNB IDs can be configured only in two eNB groups.

  • enb-id-range : Specifies the range of discrete eNB IDs.

  • from starting_eNB_id : Specifies the starting eNB ID in the range. starting_eNB_id must be a Hexadecimal number between 0x1 and 0xFFFFFFF.

  • to ending_eNB_id : Specifies the last eNB ID in the range. ending_eNB_id must be a Hexadecimal number between 0x1 and 0xFFFFFFF.

Monitoring and Troubleshooting

This section provides information regarding show commands available to monitor and troubleshoot the Adding Discrete eNB IDs to eNB Group in MME feature.

Show Commands and Outputs

show lte-policy enb-group name enb_group_name

The output of this command includes the following fields:

  • eNB ID List Name

  • Number of eNB IDs in the list

  • List of eNB IDs

Was this Document Helpful?

FeedbackFeedback

Contact Cisco