show gtpc-overload-control-profile full all

show gtpc-overload-control-profile full all

This chapter includes the show gtpc-overload-control-profile full all command output table.

Table 1. show gtpc-overload-control-profile full all Command Output Descriptions
Field Description

Weightage

System CPU Utilization Weightage

The weightage, as a percentage of 100, configured for system CPU utilization for this Overload Control Profile.

System Memory Utilization Weightage

The weightage, as a percentage of 100, configured for memory utilization for this Overload Control Profile.

License Session Utilization Weightage

The weightage, as a percentage of 100, configured for license session utilization for this Overload Control Profile.

Tolerance

Report Reduction Metric

The configured report reduction metric, as a percentage of 100, configured for this Overload Control Profile.

Self Protection Limit

The configured self-protection limit, as a percentage of 100, configured for this Overload Control Profile.

Initial-Reduction-Metric

The initial reduction metric, as a percentage of 100, configured for this Overload Control Profile.

Inclusion Frequency

Change Factor

The change factor, as a factor of 1 to 20, configured for this Load Control Profile.

Advertisement Interval

The configured advertisement-interval for this Load Control Profile. Valid entries are from 0 to 3600 seconds. The default is 300 seconds.

Validity Period

The configured validity period, configured for this Overload Control Profile, after which the overload control information will no longer be valid.

Throttling Profile

Exclude Emergency Events

Indicates if excluding the emergency events from throttling due to the peer's overload reduction metric is enabled or disabled for this Overload Control Profile. n/a indicates that Exclude Emergency Events is disabled.

Exclude EARP

Indicates which messages with earp (one or more of messages 1-15) are configured to be excluded from throttling for this Overload Control Profile. n/a indicates that Exclude EARP is disabled.

Self-Protection Behavior

Exclude EARP

Indicates if self-protection-behavior is configured for up to three EARP values. This setting configures the node so that incoming request messages for the configured evolved ARP priority values are not rejected even if the system is under self-protection mode. n/a indicates that self-protection behavior is disabled for EARP(s).

Exclude APN

Indicates if self-protection-behavior is configured for up to three APNs. n/a indicates that self-protection behavior is disabled for APN(s).

Overload control information Handling

Homer:

Indicates if the handling of overload control information for the home PLMN is enabled or disabled.

Visitor:

Indicates if the handling of overload control information for the visited PLMN is enabled or disabled.

Overload control information Publishing

Homer:

Indicates if the publishing of overload control information for the home PLMN is enabled or disabled.

Visitor:

Indicates if the publishing of overload control information for the visited PLMN is enabled or disabled.

Message Prioritization

Group1

Indicates the message prioritization, as a percentage of 100, configured for the following group of messages (group1):

  • Update Bearer Request message for default bearer generated from P-GW ingress
  • Update Bearer Request message for dedicated bearer generated from P-GW ingress
  • Handoff Create Session Request message generated from ePDG egress.

The default setting is 60%.

Group2

Indicates the message prioritization, as a percentage of 100, configured for the following group of messages (group2):

  • Create Bearer Request message for default bearer generated from P-GW ingress
  • PDN connection requested Create Session Request message from ePDG egress

The default setting is 40%.