utilization thresholds generate alerts or alarms based on the utilization
percentage of all session capacity licenses during the specified
The system uses session
capacity licenses to dictate the maximum number of simultaneous
sessions that can be supported. There are multiple session types
that require licenses (i.e. Simple IP, Mobile IP, L2TP, etc.). Although,
a single threshold is configured for all session types, alerts or alarms
can be generated for each type.
Alerts or alarms are
triggered for session license utilization based on the following
Enter condition: Actual
session license utilization percentage per session type < Low
Clear condition: Actual
session license utilization percentage per session type > High Threshold
If a trigger condition
occurs within the polling interval, the alert or alarm will not
be generated until the end of the polling interval.
When you configure
thresholds they are not permanent unless you save the changes. When you
have completed configuring thresholds, save your configuration to
flash memory, an external memory device, and/or a network
location using the Exec mode command save configuration.
For additional information on how to verify and save configuration
files, refer to the System Administration Guide and the Command
Line Interface Reference.