ASR 5500 System Administration Guide, StarOS Release 21.1

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

ASR 5500 System Administration Guide, StarOS Release 21.1

Chapter Title

Monitoring the System

Results

Updated:
January 26, 2017

Chapter: Monitoring the System

Monitoring the System

This chapter provides information for monitoring system status and performance using the show commands found in the Command Line Interface (CLI). These command have many related keywords that allow them to provide useful information on all aspects of the system ranging from current software configuration through call activity and status.

The selection of keywords described in this chapter is intended to provide the most useful and in-depth information for monitoring the system. For additional information on these and other show command keywords, refer to the Exec Mode show Commands chapter of the Command Line Interface Reference.

Important:

In Release 21.1 and forward, use the do show command to run all Exec Mode show commands while in Global Configuration Mode. It is not necessary to exit the Config mode to run a show command. The pipe character | is only available if the command is valid in the Exec mode.

SNMP Notifications

In addition to the CLI, the system supports Simple Network Management Protocol (SNMP) notifications that indicate status and alarm conditions. Refer to the SNMP MIB Reference for a detailed listing of these notifications.

Monitoring System Status and Performance

This section contains commands used to monitor the status of tasks, managers, applications and other software components in the system. Output descriptions for most of the commands are located in the Statistics and Counters Reference.
Table 1 System Status and Performance Monitoring Commands
To do this: Enter this command:
View Administrative Information
Display Current Administrative User Access
View a list of all administrative users currently logged on the system show administrators
View the context in which the administrative user is working, the IP address from which the administrative user is accessing the CLI, and a system generated ID number show administrators session id
View information pertaining to local-user administrative accounts configured for the system show local-user verbose
View statistics for local-user administrative accounts show local-user statistics verbose
View information pertaining to your CLI session show cli
Determining System Uptime
View system uptime (time since last reboot) show system uptime
View NTP Server Status
View NTP servers status show ntp status
View System Resources
View all system resources such as CPU resources and number of managers created show resources [ cpu ]
View System Alarms
View information about all currently outstanding alarms show alarm outstanding all verbose
View system alarm statistics show alarm statistics
View Congestion-Control Statistics
View Congestion-Control Statistics show congestion-control statistics
View Remote Management Statistics
Display SNMP Notification Statistics
View SNMP notification statistics show snmp notifies
Display SNMP Access Statistics
View SNMP access statistics show snmp accesses
Display SNMP Trap History
View SNMP trap history show snmp trap history
Display SNMP Trap Statistics  
View SNMP Trap Statistics show snmp trap statistics
Display ORBEM Information
View ORBEM client status show orbem client id
View ORBEM session information show orbem session table
View individual ORBEM sessions show orbem session id orbem
View ORBEM status information show orbem status
View Port Counters
Display Port Datalink Counters
View datalink counters for a specific port show port datalink counters slot#/port#
Display Port Network Processor Unit (NPU) Counters
View NPU counters for a specific port show port npu counters slot#/port#
Important:

The commands or keywords/variables that are available are dependent on platform type, product version, and installed license(s).

Important:

Some commands have different outputs depending on the platform type.

Clearing Statistics and Counters

It may be necessary to periodically clear statistics and counters in order to gather new information. The system provides the ability to clear statistics and counters based on their grouping (PPP, MIPHA, MIPFA, etc.).

Statistics and counters can be cleared using the CLI clear command. Refer to the Exec Mode Commands chapter of the Command Line Interface Reference for detailed information on using this command.

Monitoring ASR 5500 Hardware Status

Use the commands contained in this section to monitor the status of the hardware components in the chassis. For output descriptions for most of the commands, refer to the Statistics and Counters Reference.

Important:

The commands or keywords and variables are dependent on platform type, product version, and installed license(s). Some commands produce different outputs, depending on the platform type.

Table 2 Hardware Monitoring Commands
To do this: Enter this command:
View the Status of the Power System
View the status of the PFUs show power chassis
View the power status of the individual chassis slots show power all
View the Status of the Fan Trays
View the status of the fan trays, including current relative speeds and temperatures. show fans
Determine the Status of Installed Cards
View a listing of installed application cards show card table
Perform a Hardware Inventory
View all cards installed in the chassis and their hardware revision, part, serial, assembly, and fabrication numbers show hardware inventory
View details of a specific card. Output contains same information as output of both show hardware inventory and show hardware version board show hardware card slot_number
View Card Diagnostics
View boot, power and temperature diagnostics show card diag slot_number
View runtime, or real time, information show card info slot_number
View the LED Status of All Installed Cards
Note   

Refer to the descriptions of card-level and system-level LEDs in the ASR 5500 Installation Guide for detailed information.

View the LED status for all installed cards show leds all
View Available Physical Ports
View ports that are available to the system show port table
View detailed information for a specific port show port info slot_number/port_number
View CPU Resource Information
View CPU resource information show resource cpu
View CPU resources show resources { cpu | session }
View CPU usage information show cpu table; show cpu info
View Component Temperature Information
View current component temperatures show temperature
View maximum temperatures reached since last timestamp. show maximum-temperatures

Was this Document Helpful?

FeedbackFeedback

Contact Cisco