Exits the current configuration mode and returns to the Exec mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

Syntax Description

end

Usage Guidelines

Use this command to return to the Exec mode.

Exits the current mode and returns to the parent configuration mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

Syntax Description

exit

Usage Guidelines

Use this command to return to the parent configuration mode.

This command allows you to configure the x-header fields to be inserted in HTTP/WSP GET and POST request packets.

Product

ACS

Privilege

Security Administrator, Administrator

Mode

Exec > ACS Configuration > ACS xheader Format Configuration

active-charging service service_name > xheader-format format_name

Entering the above command sequence results in the following prompt:

[context_name]host_name(config-acs-xheader)#

Syntax

Syntax Description

In StarOS 8.1, StarOS 9.0, and later releases:

insert xheader_field_name { string-constant xheader_field_value | variable { bearer { 3gpp { apn | charging-characteristics | charging-id | imei | imsi | qos | rat-type | s-mcc-mnc | sgsn-address } | acr | congestion-level | customer-id  | dest-server-ip-address-port  | ggsn-address | mdn  | msisdn-no-cc   radius-string  | radius-calling-station-id  | session-id  | sn-rulebase | subscriber-ip-address | time-of-day | username } [ encrypt ] | http { host | url } } [ delete-existing ] }
no insert xheader_field_name

In StarOS 8.0:

insert xheader_field_name { string-constant xheader_field_value | variable { bearer { 3gpp charging-id | ggsn-address | imsi | radius-string | radius-calling-station-id | sgsn-address | sn-rulebase | subscriber-ip-address } | http { host | url } }
no insert xheader_field_name

no

If previously configured, removes the specified x-header field configuration.

xheader_field_name

Specifies the x-header field name to be inserted in the packets.

xheader_field_name must be an alphanumeric string of 1 through 31 characters.

Up to ten fields can be inserted in each x-header format.

string-constant xheader_field_value

Specifies constant a string value for x-header field to be inserted in the packets.

xheader_field_value must be the x-header field value, and must be an alphanumeric string of 1 through 63 characters.

variable

Specifies name of the x-header field whose value must be inserted in the packets.

bearer { 3gpp { apn | charging-characteristics | charging-id | imei | imsi | qos | rat-type | s-mcc-mnc | sgsn-address } | acr | congestion-level | customer-id | dest-server-ip-address-port | ggsn-address | mdn | msisdn-no-cc | radius-string | radius-calling-station-id | session-id | sn-rulebase | subscriber-ip-address | time-of-day | username } [ encrypt ]

Specifies value of x-header field to be inserted:

encrypt: Specifies encryption of x-header field configuration. This option must only be configured when x-header encryption is enabled.

http { host | url }

Specifies value of the x-header field to be inserted:

delete-existing

Specifies enabling detection of spoofing in x-header fields. The x-header field configured with this keyword will be removed from the HTTP header if it already exists, and only the gateway inserted field will remain. By default, anti spoofing is disabled, and if required, should be enabled at a field level.

Usage Guidelines

Use this command to configure the x-header fields to be inserted in HTTP/WSP GET and POST request packets. The x-headers would be inserted at the end of the HTTP/WSP header. This CLI command may be used up to 10 times. There is no control over the order of the fields that are to be inserted. Any of the indicated ruledef variables may be inserted using the variable option, or a static string may be inserted using the string-constant option.

Operators may insert x-headers in some HTTP/WSP packets, for which some rules will be configured. The charging-action associated with these rules will contain the list of x-headers to be inserted in the packets.