Call Control
Profile Name
|
The name of
the call control profile you chose to view.
|
Accounting
Context Name
|
The name of
the accounting context associated with this call control profile.
|
Accounting
GTPP Group Name
|
The name of
the GTTP accounting group associated with this call control profile.
|
Secondary GTPP
Group Name
|
The name of
the secondary GTTP accounting group associated with this S-GW call control
profile.
|
Secondary GTPP
Accounting Context Name
|
The accounting
context used for secondary GTPP accounting.
|
Accounting
Mode (SGW)
|
The method
selected for S-GW accounting (GTTP [default], none, or RADIUS/Diameter).
|
GPRS Attach
All
|
Indicates
whether the call control profile allows or restricts attaches of all
subscribers using the GPRS access type.
|
GPRS Attach
All Failure Code
|
The configured
GMM failure code to be sent in reject messages to GPRS mobile subscribers
attempting to attach.
|
UMTS Attach
All
|
Indicates
whether the call control profile allows or restricts attaches of all
subscribers using the UMTS access type.
|
UMTS Attach
All Failure Code
|
The configured
GMM failure code to be sent in reject messages to UMTS mobile subscribers
attempting to attach.
|
GPRS RAU Intra
All
|
Indicates
whether the call control profile is configure to allow or restrict mobile
subscribers with GPRS access-type extensions from the intra-SGSN RAU procedure.
|
GPRS RAU Intra
All Failure Code
|
The configured
GMM failure cause code that identifies the reason an intra-SGSN RAU does not
occur. This GMM cause code will be sent in the reject message to the GPRS
mobile subscriber.
|
UMTS RAU Intra
All
|
Indicates
whether the call control profile is configure to allow or restrict mobile
subscribers with UMTS access-type extensions from the intra-RAU procedure.
|
UMTS RAU Intra
All Failure Code
|
The configured
GMM failure cause code that identifies the reason an intra-SGSN RAU does not
occur. This GMM cause code will be sent in the reject message to the UMTS
mobile subscriber.
|
GPRS RAU
Inter-PLMN All
|
Indicates
whether the call control profile is configure to allow or restrict mobile
subscribers with GPRS access-type extensions from triggering RAUs between
different PLMNs.
|
GPRS RAU
Inter-PLMN All Failure Code
|
The configured
GMM failure cause code that identifies the reason an RAU does not occur between
different PLMNs. This GMM cause code will be sent in the reject message to the
GPRS mobile subscriber.
|
UMTS RAU
Inter-PLMN All
|
Indicates
whether the call control profile is configure to allow or restrict mobile
subscribers with UMTS access-type extensions from triggering RAUs between
different PLMNs.
|
UMTS RAU
Inter-PLMN All Failure Code
|
The configured
GMM failure cause code that identifies the reason an RAU does not occur between
different PLMNs. This GMM cause code will be sent in the reject message to the
UMTS mobile subscriber.
|
GPRS RAU Inter
All
|
Indicates
whether the call control profile is configure to allow or restrict mobile
subscribers with GPRS access-type extensions from the inter-SGSN RAU procedure.
|
GPRS RAU Inter
All Failure Code
|
The configured
GMM failure cause code that identifies the reason an inter-SGSN RAU does not
occur. This GMM cause code will be sent in the reject message to the GPRS
mobile subscriber.
|
UMTS RAU Inter
All
|
Indicates
whether the call control profile is configure to allow or restrict mobile
subscribers with UMTS access-type extensions from the inter-RAU procedure.
|
UMTS RAU
Inter All Failure Code
|
The
configured GMM failure cause code that identifies the reason an inter-SGSN RAU
does not occur. This GMM cause code will be sent in the reject message to the
UMTS mobile subscriber.
|
Failure Code
For Peer Sgsn Address Resolution Failure
|
The
configured GMM failure cause code that indicates that the SGSN cannot resolve
the IP address for a peer SGSN. This GMM cause code will be sent in the reject
message to the mobile subscriber.
|
GPRS SMS MO
All
|
Indicates
whether the call control profile allows or restricts mobile-originated SMS
messages from subscribers using the GPRS access type.
|
GPRS SMS MO
All Failure Code
|
The
configured GMM failure cause code that indicates that mobile-originated SMS
messages from GPRS subscribers are not permitted. This GMM cause code will be
sent in the reject message to the mobile subscriber.
|
UMTS SMS MO
All
|
Indicates
whether the call control profile allows or restricts mobile-originated SMS
messages from subscribers using the UMTS access type.
|
UMTS SMS MO
All Failure Code
|
The
configured GMM failure cause code that indicates that mobile-originated SMS
messages from UMTS subscribers are not permitted. This GMM cause code will be
sent in the reject message to the mobile subscriber.
|
GPRS SMS MT
All
|
Indicates
whether the call control profile allows or restricts mobile-terminated SMS
messages to subscribers using the GPRS access type.
|
GPRS SMS MT
All Failure Code
|
The
configured GMM failure cause code that indicates that mobile-terminated SMS
messages to GPRS subscribers are not permitted. This GMM cause code will be
sent in the reject message to the mobile subscriber.
|
UMTS SMS MT
All
|
Indicates
whether the call control profile allows or restricts mobile-terminated SMS
messages to subscribers using the UMTS access type.
|
UMTS SMS MT
All Failure Code
|
The
configured GMM failure cause code that indicates that mobile-terminated SMS
messages to UMTS subscribers are not permitted. This GMM cause code will be
sent in the reject message to the mobile subscriber.
|
GPRS Primary
PDP Context Activation All
|
Indicates
whether primary PDP context activation is allowed for GPRS mobile subscribers.
|
GPRS
Secondary PDP Context Activation All
|
Indicates
whether secondary PDP context activation is allowed for GPRS mobile
subscribers.
|
GPRS PDP
Context Activation All Failure Code
|
The
configured GMM failure cause code that indicates that PDP context activation by
GPRS subscribers is not permitted. This GMM cause code will be sent in the
reject message to the mobile subscriber.
|
UMTS Primary
PDP Context Activation All
|
Indicates
whether primary PDP context activation is allowed for UMTS mobile subscribers.
|
UMTS
Secondary PDP Context Activation All
|
Indicates
whether secondary PDP context activation is allowed for UMTS mobile
subscribers.
|
UMTS PDP
Context Activation All Failure Code
|
The
configured GMM failure cause code that indicates that PDP context activation by
UMTS subscribers is not permitted. This GMM cause code will be sent in the
reject message to the mobile subscriber.
|
GPRS Nw Init
Primary PDP Context Activation All
|
Indicates
whether network-initiated primary PDP context activation is allowed for GPRS
mobile subscribers.
|
GPRS Nw Init
Primary PDP Ctxt Activation All Failure Code
|
The
configured GMM failure cause code that indicates that network-initiated primary
PDP context activation by GPRS subscribers is not permitted. This GMM cause
code will be sent in the reject message to the mobile subscriber.
|
GPRS Nw Init
Secondary PDP Ctxt Activation All
|
Indicates
whether network-initiated secondary PDP context activation is allowed for GPRS
mobile subscribers.
|
GPRS Nw Init
Secondary PDP Ctxt Activation All Failure Code
|
The
configured GMM failure cause code that indicates that network-initiated
secondary PDP context activation by GPRS subscribers is not permitted. This GMM
cause code will be sent in the reject message to the mobile subscriber.
|
UMTS Nw Init
Primary PDP Context Activation All
|
Indicates
whether network-initiated primary PDP context activation is allowed for UMTS
mobile subscribers.
|
UMTS Nw Init
Primary PDP Ctxt Activation All Failure Code
|
The
configured GMM failure cause code that indicates that network-initiated primary
PDP context activation by UMTS subscribers is not permitted. This GMM cause
code will be sent in the reject message to the mobile subscriber.
|
UMTS Nw Init
Secondary PDP Ctxt Activation All
|
Indicates
whether network-initiated secondary PDP context activation is allowed for UMTS
mobile subscribers.
|
UMTS Nw Init
Secondary PDP Ctxt Activation All Failure Code
|
The
configured GMM failure cause code that indicates that network-initiated
secondary PDP context activation by UMTS subscribers is not permitted. This GMM
cause code will be sent in the reject message to the mobile subscriber.
|
SRNS Intra
All
|
Indicates
whether intra-SRNS (Serving Radio Network Subsystem) relocation is allowed for
mobile subscribers.
|
SRNS Intra
All Failure Code
|
The
configured GMM failure cause code that indicates that intra-SRNS relocation is
not permitted. This GMM cause code will be sent in the reject message to the
mobile subscriber.
|
SRNS Inter
All
|
Indicates
whether inter-SRNS relocation is allowed for mobile subscribers.
|
SRNS Inter
All Failure Code
|
The
configured GMM failure cause code that indicates that inter-SRNS relocation is
not permitted. This GMM cause code will be sent in the reject message to the
mobile subscriber.
|
S6a Hss
Service
|
Indicates
the name of the home subscriber server, if configured, that the SGSN will
access via the S6a interface.
|
S13 Hss
Service
|
If
configured, indicates the name of the home subscriber server that the SGSN will
access via the S13 interface.
|
S6d Hss
Service
|
S4-SGSN
only. Indicates the name of the home subscriber server, if configured, that the
SGSN will access via the S6d interface to obtain subscriber-related
information.
|
S13 prime
Hss Service
|
S4-SGSN
only. Indicates the name of the home subscriber server (HSS), if configured,
that the SGSN will access via the S13' interface to perform Mobile Equipment
Identity checks.
|
Preferred
Subscription Interface
|
If
configured, indicates the preferred subscription interface (HLR or HSS). HLR
indicates that the MAP protocol will be used to exchange messages with the HLR.
HSS indicates that the Diameter protocol will be used to exchange messages with
the HSS.
The preferred subscription interface is displayed as
hss for
epc-ue if
prefer
subscription-interface hss epc-ue is configured under the Call
Control Profile. This keyword is configured to select the HSS interface for EPC
capable subscribers.
|
DNS GGSN
Context
|
On an
S4-SGSN, indicates the context associated for DNS lookup for a GGSN.
|
DNS SGSN
Context
|
On an
S4-SGSN, indicates the context associated for DNS lookup for an SGSN.
|
DNS PGW
Context
|
Indicates
the context associated for DNS lookup for a P-GW.
|
DNS SGW
Context
|
Indicates
the context associated for DNS lookup for an S-GW.
|
DNS MSC
Context
|
On an MME,
indicates the context associated for DNS lookup for an Mobile Switching Center
(MSC).
|
Sgtp-service
Context
|
The name of
the context that has the applicable SGTP service for this call control profile
associated with it.
|
Service
|
The name of
the SGTP service associated with the context.
|
Authentication All-Events
|
Indicates
whether authentication for all events (attaches, activates, and so forth) has
been enabled or disabled.
|
Authentication Attach
|
Indicates
whether authentication for an Attach with a local P-TMSI or Attaches with an
IMSI has been enabled or disabled.
|
Authentication Attach (Inter RAT)
|
Indicates
whether Attach message authentication has been enabled or disabled for
re-authorizing subscribers on a change in Radio Access Type (RAT) of the
subscriber's node.
|
Authentication Attach (Gprs only)
|
Indicates
whether Attach message authentication has been enabled or disabled for calls
from GPRS mobile subscribers.
|
Authentication Attach (Combined)
|
Indicates
whether authentication for combined GPRS/IMSI Attaches has been enabled or
disabled.
|
Authentication Activate
|
Indicates
whether authentication for activate requests has been enabled or disabled.
|
Authentication Service Request
|
Indicates
whether authentication for all service requests has been enabled or disabled.
|
Authentication Service Request (Signaling)
|
Indicates
whether authentication for signaling service requests has been enabled or
disabled.
|
Authentication Service Request (Data)
|
Indicates
whether authentication for data service requests has been enabled or disabled.
|
Authentication Service Request (Page Response)
|
Indicates
whether authentication for page response service requests has been enabled or
disabled.
|
Authentication RAU
|
Indicates
whether authentication for routing area updates has been enabled or disabled.
|
Authentication RAU (Periodic)
|
Indicates
whether authentication for periodic RAU Requests has been enabled or disabled.
|
Authentication RAU (Ra update)
|
Indicates
whether authentication for RA update RAU Requests has been enabled or disabled.
|
Authentication RAU (Ra update with Local Ptmsi)
|
Indicates
whether authentication for RA update using the local P-TMSI type of RAU
Requests has been enabled or disabled.
|
Authentication RAU (Ra update with Foreign Ptmsi)
|
Indicates
whether authentication for RA update using foreign P-TMSI type of RAU Requests
has been enabled or disabled.
|
Authentication RAU (Imsi Combined Update)
|
Indicates
whether authentication for RA update RAU Requests using the inter-RAT P-TMSI
has been enabled or disabled.
|
Authentication RAU (Combined Update)
|
Indicates
whether authentication for RAU Requests using the local P-TMSI has been enabled
or disabled.
|
Authentication RAU (Combined Update IRAT PTMSI)
|
Indicates
whether authentication for RAU Requests using inter-RAT and the local P-TMSI
has been enabled or disabled.
|
Authentication RAU (Imsi Combined Update)
|
Indicates
whether authentication for RAU Requests using IMSI and local P-TMSI values has
been enabled or disabled.
|
Authentication RAU (Imsi Combined Update IRAT PTMSI)
|
Indicates
whether authentication for RAU Requests using IMSI values, inter-RAT, and the
local P-TMSI has been enabled or disabled.
|
Authentication Detach
|
Indicates
whether authentication for Detach Requests has been enabled or disabled.
|
Authentication SMS
|
Indicates
whether authentication for all SMS messages has been enabled or disabled.
|
Authentication SMS (MO-SMS)
|
Indicates
whether authentication for mobile-originated SMS messages has been enabled or
disabled.
|
Authentication SMS (MT-SMS)
|
Indicates
whether authentication for mobile-terminated SMS messages has been enabled or
disabled.
|
Regional
Subscription Restriction Failure Code Value
|
The
configured GMM failure cause code that indicates that mobile subscriber lacks
the required subscription to place calls to the region. This GMM cause code
will be sent in the reject message to the mobile subscriber.
|
ARD-Checking
|
Indicates
whether access restriction data (ARD) checking in incoming subscriber data
(ISD) messages has been enabled or disabled.
|
ARD Failure
Code
|
The
configured GMM failure cause code that indicates the incoming subscriber data
has failed ARD checking. This GMM cause code will be sent in the reject message
to the mobile subscriber.
|
Access
Restriction Data
|
Indicates if
the eutran-not-allowed parameter is enabled to verride the "eutran-not-allowed"
flag received from the HLR/HSS in the ISD/ULA request for the Access
Restriction Data (ARD) parameter. The helps ensure that an SRNS relocation
handover to E-UTRAN is not allowed for E-UTRAN capable UEs that have only a
UTRAN/GERAN roaming agreement.
|
Zone-Code
Check
|
Indicates
whether zone code checking has been enabled or disabled.
|
Usage of
Auth Vectors From Old Sgsn
|
Indicates
whether the ability of an SGSN to receive authorization vectors from other
SGSNs has been enabled or disabled.
|
SGSN Address
|
Provides
information on how the peer SGSN is configured, including the peer IP address,
RAC and LAC values or RNC_ID, and interface type.
|
PEER-MME
|
Provides
information on how the peer MME is configured, including the peer IP address,
MME Group ID or TAC, and interface type.
|
Order of
Preference for Integrity Algorithm is
|
The
integrity algorithm that receives first priority.
|
Order of
Preference for Encryption Algorithm is
|
The
encryption algorithm that receives first priority.
|
Order of
Preference for Gprs Ciphering Algorithm is
|
The GPRS
ciphering algorithm that receives first priority.
|
PTMSI-signature allocation
|
Indicates
whether P-TMSI signature allocation has been enabled or disabled.
|
PTMSI-Signature-Realloc Interval value UMTS
|
The time
interval (in minutes) for skipping the P-TMSI signature service/RAU/attach
request message procedure for UMTS mobile subscribers.
|
PTMSI-Signature-Realloc Interval value GPRS
|
The time
interval (in minutes) for skipping the P-TMSI signature service/RAU/attach
request message procedure for GPRS mobile subscribers.
|
PTMSI-Signature-Realloc Frequency value UMTS
|
How many
times P-TMSI signature reallocation for service requests can be skipped for
UMTS mobile subscribers.
|
PTMSI-Signature-Realloc Frequency value GPRS
|
How many
times P-TMSI signature reallocation for service requests can be skipped for
GPRS mobile subscribers.
|
PTMSI-Signature-Realloc Attach Frequency value UMTS
|
How many
times P-TMSI signature reallocation for Attach requests can be skipped for UMTS
mobile subscribers.
|
PTMSI-Signature-Realloc Attach Frequency value GPRS
|
How many
times P-TMSI signature reallocation for Attach requests can be skipped for GPRS
mobile subscribers.
|
PTMSI-Signature-Realloc RAU (Generic) Frequency value UMTS
|
How many
times P-TMSI signature reallocation for routing area updates can be skipped for
UMTS mobile subscribers.
|
PTMSI-Signature-Realloc RAU (Generic) Frequency value GPRS
|
How many
times P-TMSI signature reallocation for routing area updates can be skipped for
GPRS mobile subscribers.
|
PTMSI-Signature-Realloc RAU Periodic Frequency value UMTS
|
How many
times P-TMSI signature reallocation for periodic routing area updates can be
skipped for UMTS mobile subscribers.
|
PTMSI-Signature-Realloc RAU Periodic Frequency value GPRS
|
How many
times P-TMSI signature reallocation for periodic routing area updates can be
skipped for GPRS mobile subscribers.
|
PTMSI-Signature-Realloc RAU RA Update Frequency value UMTS
|
How many
times P-TMSI signature reallocation for routing area update RA updates can be
skipped for UMTS mobile subscribers.
|
PTMSI-Signature-Realloc RAU RA Update Frequency value GPRS
|
How many
times P-TMSI signature reallocation for routing area update RA updates can be
skipped for GPRS mobile subscribers.
|
PTMSI-Signature-Realloc RAU Combined Update Frequency value UMTS
|
How many
times P-TMSI signature reallocation for combined requests can be skipped for
UMTS mobile subscribers.
|
PTMSI-Signature-Realloc RAU Combined Update Frequency value GPRS
|
How many
times P-TMSI signature reallocation for combined requests can be skipped for
GPRS mobile subscribers.
|
PTMSI-Signature-Realloc RAU Imsi Combined Update Frequency value
UMTS
|
How many
times P-TMSI signature reallocation for combined RAU updates with IMSI values
can be skipped for UMTS mobile subscribers.
|
PTMSI-Signature-Realloc RAU Imsi Combined Update Frequency value
GPRS
|
How many
times P-TMSI signature reallocation for combined RAU updates with IMSI values
can be skipped for GPRS mobile subscribers.
|
PTMSI-Signature-Realloc Ptmsi-Reallocation-Cmd Update Frequency
value UMTS
|
How many
times P-TMSI signature reallocation during PTMSI reallocation can be skipped
for UMTS mobile subscribers.
|
PTMSI-Signature-Realloc Ptmsi-Reallocation-Cmd Update Frequency
value GPRS
|
How many
times P-TMSI signature reallocation during PTMSI reallocation can be skipped
for GPRS mobile subscribers.
|
PTMSI-Realloc Attach
|
Indicates
whether P-TMSI reallocation has been enabled or disabled.
|
PTMSI-Realloc Interval
|
The time
interval (in minutes) for skipping the P-TMSI reallocation during the
service/RAU/attach request message procedure.
|
PTMSI-Realloc Frequency
|
How many
times P-TMSI reallocation can be skipped during service/RAU/attach request
message procedure.
|
PTMSI-Realloc RAU
|
Indicates
whether P-TMSI reallocation during routing area updates has been enabled or
disabled.
|
PTMSI-Realloc RAU (Periodic)
|
Indicates
whether P-TMSI reallocation during periodic routing area updates has been
enabled or disabled.
|
PTMSI-Realloc RAU (Periodic) Frequency value
|
How many
times P-TMSI reallocation can be skipped during the periodic RAU message
procedure.
|
PTMSI-Realloc RAU (Ra-Update)
|
Indicates
whether P-TMSI reallocation during the RA update RAU request procedure has been
enabled or disabled.
|
PTMSI-Realloc RAU (Ra-Update) Frequency
|
How many
times P-TMSI reallocation can be skipped during the RA update RAU message
procedure.
|
PTMSI-Realloc RAU (Combined-Update)
|
Indicates
whether P-TMSI reallocation during the RAU combined update procedure has been
enabled or disabled.
|
PTMSI-Realloc RAU (Combined-Update) Frequency
|
How many
times P-TMSI reallocation can be skipped during the RAU combined update message
procedure.
|
PTMSI-Realloc RAU (Combined-Update with IMSI attach)
|
Indicates
whether P-TMSI reallocation during the RAU combined update with IMSI procedure
has been enabled or disabled.
|
PTMSI-Realloc RAU (Combined-Update with IMSI) Frequency
|
How many
times P-TMSI reallocation can be skipped during the RAU combined update with
IMSI message procedure.
|
PTMSI-Realloc Service Request (Signalling)
|
Indicates
whether P-TMSI reallocation during signaling service requests has been enabled
or disabled.
|
PTMSI-Realloc Service Request (Signalling) Freq
|
How many
times P-TMSI reallocation can be skipped during the signaling service request
message procedure.
|
PTMSI-Realloc Service Request (Data)
|
Indicates
whether P-TMSI reallocation during data service requests has been enabled or
disabled.
|
PTMSI-Realloc Service Request (Data) Freq
|
How many
times P-TMSI reallocation can be skipped during the data service request
message procedure.
|
PTMSI-Realloc Service Request (Page Response)
|
Indicates
whether P-TMSI reallocation during page response service requests has been
enabled or disabled.
|
PTMSI-Realloc Service Request (Page Response) Freq
|
How many
times P-TMSI reallocation can be skipped during the page response service
request message procedure.
|
Inactivity
detection for establishing pdp contexts
|
Indicates
whether an SGSN will be periodic polled to verify that it can accept requests
to establish a PDP context.
|
Inactivity
detection for establishing pdp contexts - Timer
|
The timeout
value in milliseconds for determining that a SGSN is unresponsive.
|
Inactivity
detection for establishing pdp contexts - Action
|
The action
to be taken if a SGSN is declared unresponsive.
|
Monitor
Re-attaches after Inactivity Detach
|
Indicates
whether the SGSN will be monitored to determine if it has become responsive
again after an inactivity timeout and detach.
|
Charging
Characteristics Prefer Local
|
When
enabled, indicates whether the call-control profile prefers the charging
characteristics settings from the call control profile instead of the charging
characteristics received from the HLR.
|
Charging
Characteristics Behavior
|
The behavior
bit in charging characteristics provided by the call control profile when the
HLR does not provide a value.
|
Charging
Characteristics Profile-Index
|
The charging
characteristics profile index specified by the call control profile, such as 4
for prepaid billing or 8 for normal billing.
|
Charging
Characteristics Behavior No Records
|
The behavior
bit in charging characteristics that is used to determine that no accounting
records will be generated.
|
APN
restriction
|
If this
feature is enable, the SGSN sends the maximum APN restriction value in every
CPC Request message sent to the GGSN
|
UMTS
Gmm-Information
|
When this
feature is enabled, indicates that GPRS mobility management (GMM) parameters
will be included in message to UMTS mobile subscribers.
|
GPRS
Gmm-Information
|
When this
feature is enabled, indicates that GMM parameters will be included in message
to GPRS mobile subscribers.
|
User
Equipment Identity Retrieval
|
Indicates
whether International Mobile Equipment Identity (IMEI) or software version (SV)
retrieval and validation has been enabled or disabled.
|
MAP UGL
Message. Include Access Type Private Extension
|
The specific
access-type private extension included in GPRS Location Update (GLU) request
MAP messages.
|
MAP UGL
Message. Include IMEISV
|
The specific
International Mobile equipment Identity-Software Version (IMEI-SV) information
included in GLU request MAP messages.
|
MAP
MO-FWD-SM Message. Include IMSI
|
Indicates if
the inclusion of the IMSI of the originating subscriber in the
mobile-originated SM transfer is enabled or disabled. This parameter is
included when the sending entity (MSC or SGSN) supports mobile number
portability (MNP). This IMSI IE is required in the in
MAP-MO-FORWARD-SHORT-MESSAGE in countries where MNP is deployed.
|
Reuse of
authentication triplets
|
Indicates
whether the reuse of authentication triplets in the event of a failure has been
enabled or disabled.
|
Re-Authentication
|
Indicates
whether the re-authentication feature, which instructs the SGSN to retry
authentication with another RAND in situations where failure of the first
authentication has occurred, has been enabled or disabled.
|
Direct
Tunnel
|
Indicates if
the SGSN allows direct tunneling if the direct tunneling is supported by
destination node.
|
GTPU Fast
Path
|
Indicates
whether Fast Path support for network processing unit (NPU) processing of GTP-U
packets of user sessions has been enabled or disabled.
|
Super
Charger
|
Indicates
whether the SGSN's ability to work with a super-charged network is enabled or
disabled. By enabling the super charger functionality for 2G or 3G connections
controlled by an operator policy, the SGSN changes the hand-off and location
update procedures to reduce signaling traffic management.
|
Sending
Radio Access Technology (RAT) IE
|
When this
feature is enabled, the SGSN sends RAT information elements (IEs) within GTP
messages.
|
Sending User
Location Information (ULI) IE
|
When this
feature is enabled, the SGSN sends ULI IEs within GTP messages.
|
Sending
IMEISV IE
|
When this
feature is enabled, the SGSN includes the IMEISV values of the mobile
subscriber when sending GTP messages of the type "Create PDP Context Request".
|
Derive
IMEISV from IMEI
|
When this
feature is enabled, the SGSN sends the IMEI to the GGSN as an IMEI-SV.
|
Sending MS
Time Zone IE
|
When this
feature is enabled, the SGSN sends the mobile subscribers timezone IE in GTP
messages of the type "Create PDP Request" and "Update PDPContext Request".
|
Treat as
HPLMN
|
When this
feature is enabled, the MME or SGSN treats an IMSI series as coming from the
home PLMN.
|
Idle-mode-Signaling-Reduction (ISR) for UMTS
|
Indicates if
the Idle-Mode-Signaling-Reduction (ISR) feature is enabled for UMTS (3G)
subscribers. When ISR is enabled, the MME and SGSN allow the UE to be
registered simultaneously in both the UMTS network on the SGSN and on the
E-UTRAN on the MME. A separate feature license is required to enable ISR.
|
Idle-mode-Signaling-Reduction (ISR) for GPRS
|
Indicates if
the Idle-Mode-Signaling-Reduction (ISR) feature is enabled for GPRS (2G)
subscribers. When this feature is enabled, the MME and SGSN allow the UE to be
registered simultaneously in both the GPRS network on the SGSN and on the
E-UTRAN on the MME. A separate feature license is required to enable ISR.
|
Location
Reporting for UMTS
|
When this
feature is enabled, the MME can query and receive UE location reports from an
eNodeB.
|
Location
Reporting for GPRS
|
When this
feature is enabled, the MME can query and receive UE location reports from an
eNodeB.
|
EPS Attach Restrict
|
Voice
Unsupported
|
When this
feature is enabled, the MME can restrict UE attaches when the network does not
support voice, for example when Voice over IMS is not supported in the network
and the UE does not support CSFB.
|
IMSI Attach
Fail
|
When this
feature is enabled, the MME can restrict UE attaches when the IMSI Attach
fails.
|
CSFB Restrictions
|
SMS Only
|
When this
setting is enabled, the MME allows SMS-only attaches for Circuit Switched Fall
Back (CSFB) services.
|
Not Allowed
|
When this
setting is enabled, the MME disallows CSFB services (both SMS-only and voice
services).
|
Not
Preferred
|
When this
setting is enabled, the MME returns "not-preferred" for CSFB services for
combined EPS/IMSI attach requests.
|
Network Feature Support
|
IMS Voice
Over PS
|
Indicates
whether IMS Voice over Packet-Switched information element (IE) is supported as
part of the MME (Network) Feature
|
Qos
|
Indicates
the transmission of quality of service (QoS) parameters has been enabled or
disabled.
|
AMBR
|
Indicates
whether an aggregate maximum bit rate (AMBR) will be enforced for user
equipment.
|
Gn/Gp ARP
|
Indicates
whether Gn-Gp pre-release 8 ARP and pre-emption parameters will be enforced or
not.
|
High
Priority (H) (Default)
|
The
high-priority (address retention protocol) ARP value used for QoS.
|
Medium
Priority (M) (Default)
|
The
medium-priority ARP value used for QoS.
|
Gn/Gp
Pre-Emption Capabilities (Default)
|
The
pre-emption capability criteria for PDP contexts imported from an SGSN on Gn/Gp
interfaces.
|
Gn/Gp
Pre-Emption Vulnerabilities (Default)
|
The
pre-emption vulnerability criteria for PDP contexts imported from an SGSN on
Gn/Gp interfaces.
|
GPRS PDP
Type IPV4V6 Override
|
Indicates
whether the MME is configured to override the requested Packet Data Network
(PDN) type (IPv4 or IPv6) based on the inbound roamer PLMN.
|
UMTS PDP
Type IPV4V6 Override
|
Indicates
whether the MME is configured to override the requested Packet Data Network
(PDN) type (IPv4 or IPv6) based on the inbound roamer PLMN.
|
EPS PDN Type
IPV4V6 Override
|
Indicates
whether the MME is configured to override the requested Packet Data Network
(PDN) type (IPv4 or IPv6) based on the inbound roamer PLMN.
|
RFSP
|
Displays the
configuration of the
rfsp-override
command which the MME uses to control the override of RAT Frequency Selection
Priority (RFSP).
|
Rfsp-override eutran-ho-restricted
|
Displays the
configured value for RAT frequency selection priority when Handover to EUTRAN
is restricted. This value overrides the RFSP ID value sent by the HLR/HSS in an
EPS subscription.
|
Cause Code Mapping
|
Restricted
zone code
|
Displays the
emm-cause-code to be returned to the UE when the UE requests access to a
restricted zone during an EMM procedure.
|
Congestion
|
Displays the
emm-cause-code to be returned to the UE when the system has detected a
congestion condition during an EMM procedure.
|
Newcall
policy restrict
|
Displays the
emm-cause-code to be returned to the UE when the policy restricts new calls.
|
APN mismatch
|
Displays the
emm-cause-code to be returned to the UE when the system has detected an APN
mismatch condition during an EMM procedure.
|
VLR down
|
Displays the
emm-cause-code to be returned to the UE when the system has detected a VLR down
condition during an EMM procedure.
|
VLR
unreachable
|
Displays the
emm-cause-code to be returned to the UE when the system has detected a VLR
unreachable condition during an EMM procedure.
|
Auth failure
|
Displays the
emm-cause-code to be returned to the UE when an authentication failure occurs.
|
PEER NODE
unknown
|
Displays the
emm-cause-code to be returned to the UE when peer node resolution is not
successful.
|
CTXT
transfer fail SGSN
|
Displays the
emm-cause-code to be returned to the UE when a UE context transfer failure from
a peer SGSN occurs.
|
CTXT
transfer fail MME
|
Displays the
emm-cause-code to be returned to the UE when a UE context transfer failure from
a peer MME occurs.
|
HSS
unavailable
|
Displays the
emm-cause-code to be returned to the UE when HSS resolution fails in the MME or
the HSS does not respond in time.
|
SGW
selection failure
|
Displays the
emm-cause-code to be returned to the UE when a failure occurs during S-GW
selection.
|
PGW
selection failure
|
Displays the
emm-cause-code to be returned to the UE when a failure occurs during P-GW
selection.
|
GW
unreachable Attach
|
Displays the
emm-cause-code to be returned to the UE when a gateway (S-GW or P-GW) does not
respond during an EMM Attach procedure.
|
GW
unreachable TAU
|
Displays the
emm-cause-code to be returned to the UE when a gateway (S-GW or P-GW) does not
respond during an EMM TAU procedure.
|
NO bearers
active
|
Displays the
emm-cause-code to be returned to the UE when the context received from a peer
SGSN (during a TAU procedure) does not contain any active PDP contexts
|
SGSN Core
Network Interface Selection
|
Displays the
SGSN Core Network Interface selection.
|
SGSN Core
Network Interface Type
|
Displays the
interface type selected as either Gn or S4.
|
S4 for EPC
Capable Devices
|
Displays the
configuration as either
Always or
When EPS Subscription
Available, based on the CLI configured in the command
sgsn-core-nw-interface in the Call-Control
Profile.
|
S4 for
Non-EPC Capable Devices
|
Displays the
configuration as
Never or
Always or
When EPS Subscription
Available, based on the CLI configured in the command
sgsn-core-nw-interface in the Call-Control
Profile.
|
Uplink data
status IE in service request
|
This field
displays whether the Uplink Data Status IE is Processed or Ignored.
|
GUTI
Reallocation
|
This
parameter indicates if GUTI Reallocation is configured. The configured status
is displayed as "Enabled" or "Disabled".
|
GUTI
Reallocation Frequency
|
Displays the
value of GUTI Reallocation Frequency in number of NAS requests.
|
GUTI
Reallocation Periodicity
|
Displays the
value of GUTI Reallocation Periodicity in minutes.
|
Authentication All-Events ANY (UMTS/GPRS/EUTRAN) Frequency
|
This
parameter indicates if Selective Authentication frequency for all events is
configured. If the frequency is configured the status is displayed as "Enabled"
or it is displayed as "Disabled".
|
Authentication All-Events ANY (UMTS/GPRS/EUTRAN) Frequency Value
|
Displays the
value of the configured Selective Authentication Frequency for all events.
|
Authentication All-Events ANY (UMTS/GPRS/EUTRAN) Periodicity
|
This
parameter indicates if Selective Authentication periodicity for all events is
configured. If the Periodicity is configured the status is displayed as
"Enabled" or it is displayed as "Disabled".
|
Authentication All-Events ANY (UMTS/GPRS/EUTRAN) Periodicity
Value
|
Displays the
value of the configured Selective Authentication Periodicity for all events.
|
Authentication Attach ANY Frequency
|
This
parameter indicates if Selective Authentication frequency for Attach procedure
is configured. If the frequency is configured the status is displayed as
"Enabled" or it is displayed as "Disabled".
|
Authentication Attach ANY (UMTS/GPRS/EUTRAN) Frequency Value
|
Displays the
value of the configured Selective Authentication Frequency for Attach
procedures.
|
Authentication Attach ANY Periodicity
|
This
parameter indicates if Selective Authentication periodicity for Attach
procedure is configured. If the frequency is configured the status is displayed
as "Enabled" or it is displayed as "Disabled".
|
Authentication Attach ANY Periodicity Value
|
Displays the
value of the configured Selective Authentication Periodicity for Attach
procedures.
|
Authentication Attach Inter-rat ANY (UMTS/GPRS/EUTRAN) Frequency
|
This
parameter indicates if Selective Authentication frequency for Attach during
Inter-RAT procedure is configured. If the frequency is configured the status is
displayed as "Enabled" or it is displayed as "Disabled".
|
Authentication Attach Inter-rat ANY (UMTS/GPRS/EUTRAN) Frequency
Value
|
Displays the
value of the configured Selective Authentication Frequency for Attach during
Inter-RAT procedures.
|
Authentication Attach Inter-rat ANY Periodicity
|
This
parameter indicates if Selective Authentication periodicity for Attach during
Inter-RAT procedure is configured. If the frequency is configured the status is
displayed as "Enabled" or it is displayed as "Disabled".
|
Authentication Attach Inter-rat ANY Periodicity Value
|
Displays the
value of the configured Selective Authentication Periodicity for Attach during
Inter-RAT procedures.
|
Authentication Service Req Frequency
|
This
parameter indicates if Selective Authentication frequency for Service Requests
is configured. If the frequency is configured the status is displayed as
"Enabled" or it is displayed as "Disabled".
|
Authentication Service Req Frequency Value
|
Displays the
value of the configured Selective Authentication Frequency for Service
Requests.
|
Authentication Service Req Periodicity
|
This
parameter indicates if Selective Authentication periodicity for Service
Requests is configured. If the frequency is configured the status is displayed
as "Enabled" or it is displayed as "Disabled".
|
Authentication Service Req Periodicity Value
|
Displays the
value of the configured Selective Authentication Periodicity for Service
Requests.
|
Authentication Service Req Data Frequency
|
This
parameter indicates if Selective Authentication frequency for Data Service
Requests is configured. If the frequency is configured the status is displayed
as "Enabled" or it is displayed as "Disabled".
|
Authentication Service Req Data Frequency Value
|
Displays the
value of the configured Selective Authentication Frequency for Data Service
Requests.
|
Authentication Service Req Data Periodicity
|
This
parameter indicates if Selective Authentication periodicity for Data Service
Requests is configured. If the frequency is configured the status is displayed
as "Enabled" or it is displayed as "Disabled".
|
Authentication Service Req Data Periodicity Value
|
Displays the
value of the configured Selective Authentication Periodicity for Data Service
Requests.
|
Authentication Service Req Signaling Frequency
|
This
parameter indicates if Selective Authentication frequency for Signaling Service
Requests is configured. If the frequency is configured the status is displayed
as "Enabled" or it is displayed as "Disabled".
|
Authentication Service Req Signaling Frequency Value
|
Displays the
value of the configured Selective Authentication Frequency for Signaling
Service Requests.
|
Authentication Service Req Signaling Periodicity
|
This
parameter indicates if Selective Authentication periodicity for Signaling
Service Requests is configured. If the frequency is configured the status is
displayed as "Enabled" or it is displayed as "Disabled".
|
Authentication Service Req Signaling Periodicity Value
|
Displays the
value of the configured Selective Authentication Periodicity for Signaling
Service Requests.
|
Authentication Service Req Page Response Frequency
|
This
parameter indicates if Selective Authentication frequency for Page Response
Service Requests is configured. If the frequency is configured the status is
displayed as "Enabled" or it is displayed as "Disabled".
|
Authentication Service Req Page Response Frequency Value
|
Displays the
value of the configured Selective Authentication Frequency for Page Response
Service Requests.
|
Authentication Service Req Page Response Periodicity
|
This
parameter indicates if Selective Authentication periodicity for Page Response
Service Requests is configured. If the frequency is configured the status is
displayed as "Enabled" or it is displayed as "Disabled".
|
Authentication Service Req Page Response Periodicity Value
|
Displays the
value of the configured Selective Authentication Periodicity for Page Response
Service Requests.
|
Authentication TAU Frequency
|
This
parameter indicates if Selective Authentication frequency for TAU Procedures is
configured. If the frequency is configured the status is displayed as "Enabled"
or it is displayed as "Disabled".
|
Authentication TAU Frequency Value
|
Displays the
value of the configured Selective Authentication Frequency for TAU Procedures.
|
Authentication TAU Periodicity
|
This
parameter indicates if Selective Authentication periodicity for TAU Procedures
is configured. If the frequency is configured the status is displayed as
"Enabled" or it is displayed as "Disabled".
|
Authentication TAU Periodicity Value
|
Displays the
value of the configured Selective Authentication Periodicity for TAU
Procedures.
|
Authentication Inter-RAT TAU Frequency
|
This
parameter indicates if Selective Authentication frequency for TAU during
Inter-RAT procedures is configured. If the frequency is configured the status
is displayed as "Enabled" or it is displayed as "Disabled".
|
Authentication TAU Frequency Value
|
Displays the
value of the configured Selective Authentication Frequency for TAU during
Inter-RAT procedures.
|
Authentication TAU Inter-rat Periodicity
|
This
parameter indicates if Selective Authentication periodicity for TAU during
Inter-RAT procedures is configured. If the frequency is configured the status
is displayed as "Enabled" or it is displayed as "Disabled".
|
Authentication TAU Inter-rat Periodicity Value
|
Displays the
value of the configured Selective Authentication Periodicity for TAU during
Inter-RAT procedures.
|
Authentication Intra-RAT TAU Frequency
|
This
parameter indicates if Selective Authentication frequency for TAU during
Intra-RAT procedures is configured. If the frequency is configured the status
is displayed as "Enabled" or it is displayed as "Disabled".
|
Authentication Intra-RAT TAU Frequency Value
|
Displays the
value of the configured Selective Authentication Frequency for TAU during
Intra-RAT procedures.
|
Authentication TAU Intra-rat Periodicity
|
This
parameter indicates if Selective Authentication periodicity for TAU during
Intra-RAT procedures is configured. If the frequency is configured the status
is displayed as "Enabled" or it is displayed as "Disabled".
|
Authentication TAU Intra-rat Periodicity Value
|
Displays the
value of the configured Selective Authentication Periodicity for TAU during
Intra-RAT procedures.
|
Authentication Normal TAU Frequency
|
This
parameter indicates if Selective Authentication frequency for Normal TAU
procedures is configured. If the frequency is configured the status is
displayed as "Enabled" or it is displayed as "Disabled".
|
Authentication Normal TAU Frequency Value
|
Displays the
value of the configured Selective Authentication Frequency for Normal TAU
procedures.
|
Authentication TAU Normal Periodicity
|
This
parameter indicates if Selective Authentication periodicity for Normal TAU
procedures is configured. If the frequency is configured the status is
displayed as "Enabled" or it is displayed as "Disabled".
|
Authentication TAU Normal Periodicity Value
|
Displays the
value of the configured Selective Authentication Periodicity for Normal TAU
procedures.
|
Authentication Periodic TAU Frequency
|
This
parameter indicates if Selective Authentication frequency for Periodic TAU
procedures is configured. If the frequency is configured the status is
displayed as "Enabled" or it is displayed as "Disabled".
|
Authentication Periodic TAU Frequency Value
|
Displays the
value of the configured Selective Authentication Frequency for Periodic TAU
procedures.
|
Authentication TAU Periodic Periodicity
|
This
parameter indicates if Selective Authentication periodicity for Periodic TAU
procedures is configured. If the frequency is configured the status is
displayed as "Enabled" or it is displayed as "Disabled".
|
Authentication TAU Periodic Periodicity Value
|
Displays the
value of the configured Selective Authentication Periodicity for Periodic TAU
procedures.
|
Mapped SM
Cause For Req APN not sup in current RAT and PLMN combination
|
Displays the
mapped SM caused code for APN request not supported in current RAT and PLMN
combination.
|
Cause Code
Mapping
|
Displays the
cause code mapping information.
|
APN not
supported PLMN-RAT esm-proc
|
Displays the
cause code configured for APN not supported PLMN-RAT esm-proc.
|
APN not
supported PLMN-RAT Attach
|
Displays the
cause code configured for APN not supported PLMN-RAT in attach requests.
|
APN not
supported PLMN-RAT TAU
|
Displays the
cause code configured for APN not supported PLMN-RAT in TAU requests.
|
Paging
priority to be sent to eNodeB
|
If paging
priority support is enabled this field displays the configured value of paging
priority sent to eNodeB for CS paging. For example, if the paging priority
value is set to "1", this field is displayed as "Enabled with value: 1". If
paging priority support is disabled this field is displayed as "Disabled".
|
MPS CS
priority
|
The MPS CS
priority is displayed as either "Subscribed" or "None" based on the
configuration.
|
MPS EPS priority
|
The MPS EPS priority is displayed as either "Subscribed" or
"None" based on the configuration.
|
Paging priority to be sent to eNodeB for CS
|
Displayed as "Enabled" with value if paging-priority cs value
is configured.
|
Paging priority mapping for CS
|
Displayed as “Enabled” with emlpp-priority to paging-priority
mapping information if mapping is configured, otherwise it is displayed as
“Disabled”.
|
Paging priority mapping for EPS
|
Displayed as “Enabled” with ARP to paging-priority mapping
information if mapping is configured, otherwise it is diplayed as “Disabled”.
|
Handover Restriction
|
Displayed as "Enabled" if HO restriction is configured, else it
is displayed as "Disabled".
|