Service name
|
The Gs service that
is running in this session.
|
State
|
Status of the Gs service.
|
Context
|
The name of the context
in which Gs service is running.
|
SGSN Number
|
The E.164 number for
the SGSN to associate with the Gs service.
|
SSN
|
Indicates the subsystem
number configured or not. If configured it indicates SSN.
|
Self SCCP Network Id
|
Indicates the SCCP
network identifier configured or not. If configured it indicates SSCP
network identifier.
|
T6-1 Timeout
|
Indicates the retransmission
timer (T6-1) value to guard the location update.
Default: 10 seconds
Range: 10 to 90 seconds
|
T8 Timeout
|
Indicates the retransmission
timer (T8) value to guard the explicit IMSI detach from the GPRS
service procedure.
Default: 4 seconds
Range: 1 to 30 seconds
|
T9 Timeout
|
Indicates the retransmission
timer (T9) value to guard the explicit IMSI detach from the non-GPRS
service procedure.
Default: 4 seconds
Range: 1 to 30 seconds
|
T10 Timeout
|
Indicates the retransmission
timer (T10) value to guard the implicit IMSI detach from the non-GPRS
service procedure.
Default: 4 seconds
Range: 1 to 30 seconds
|
T12-1 Timeout
|
Indicates the retransmission
timer value (T12-1) in minutes to control the resetting of SGSN-Reset
variable procedure.
Default: 54 minutes
(plus 8 seconds for transmission delay)
Range: 0 to 380 minutes
|
T12-2 Timeout
|
Indicates the retransmission
timer (T10) value to guard the SGSN reset procedure.
Default: 4 seconds
Range: 1 to 30 seconds
|
Max N8 Retries
|
Indicates the maximum
retransmission allowed for procedure for explicit IMSI detach message
from GPRS service (N8).
Default: 2 retries
Range: 0 to 10 retries
|
Max N9 Retries
|
Indicates the maximum
retransmission allowed for procedure for explicit IMSI detach message
from non-GPRS service (N9).
Default: 2 retries
Range: 0 to 10 retries
|
Max N10 Retries
|
Indicates the maximum
retransmission allowed for procedure for implicit IMSI detach message
from non-GPRS service (N10).
Default: 2 retries
Range: 0 to 10 retries
|
Max N12 Retries
|
Indicates the maximum
retransmission allowed for N12 procedure for sending BSSAP+ Reset
Indication message (N12).
Default: 2 retries
Range: 0 to 10 retries
|
GS Service Configurations
|
LAC Id
|
Indicates the subscriber
location area code identifier configured in Gs service.
Range: 1 through 65535
|
Pool Type
|
Type of pool area (non-pool
area or pool area) configured in Gs service. Possible values are:
|
Pool Area/ Non
Pool Area name
|
Name of the configured
Non-pool area or pool area in Gs service.
|
Pool Area Configurations
|
Pool Area Name
|
Name of the configured
pool area in Gs service.
|
Default Vlr
|
Name of the default
VLR attached to this pool area.
|
LAC in Pool Area
|
Indicates the subscriber
location area code identifier configured in this pool area.
Range: 1 through 65535
|
VLR Hash Type
|
Indicates
the type of hash configured for this pool area. Possible values
are:
|
Value / Range
|
Indicates the value
of hash or range of hash.
|
Vlr Name
|
Name of the VLR attached
to this pool area.
|
Non-Pool Area Configurations
|
Non-Pool Area Name
|
Name of the configured
non-pool area in Gs service.
|
Vlr Name
|
Name of the VLR attached
to this non-pool area.
|
LAC in Pool Area
|
Indicates the subscriber
location area code identifier configured in this non-pool area.
Range: 1 through 65535
|
VLR Configurations
|
VLR Name
|
Name of the VLR attached
to this Gs service.
|
ISDN Numbe
|
Indicates the E.164
ISDN number of configured VLR.
|
SSN
|
Indicates the subsystem
number configured or not. If configured it indicates SSN.
|
Point Code
|
Indicates the configured
point code address for VLR in SS7 address format.a
|
SGSN Reset
|
Indicates whether SGSN
reset function is allowed or not. Possible values are:
|