Default APN
|
Displays the network identifier to be used when the normal APN
selection process fails. This setting is configured using the
apn-selection-default command.
Up to four individual default APN configurations will be
displayed if configured.
|
Require Subscription APN
|
Indicates if this APN name must be included in the subscription
data for the default APN feature to function.
|
Use Default APN when no APN is requested
|
Indicates that the default APN should be used if no APN is
requested in the subscription record.
|
Use Default APN when DNS Query fails
|
Indicates that the default APN should be used if the DNS query
fails.
|
Fallback APN to use when Default APN not present in
subscription
|
Indicates the dummy APN to be used when the default APN is not
present in the subscription.
|
Fallback APN in First subscription record when Default APN not
present
|
Indicates whether to use the APN from the first subscription
record when the configured default APN is not available.
|
Use APN from Single Subscription record
|
Indicates whether to use the APN from the subscription record if
it is the only record available and normal APN selection fails.
|
APN selection mode when APN requested not present
|
Indicates the default APN selection mode, either
first-in-subscription or lowest-context-id. This setting is configured using
the
apn-selection-default command.
|
APN to use when no APN is requested
|
Indicates the APN that will be used when no APN is requested.
This setting is configured using the
blank-apn command.
|
Charging Characteristic APN Override Entry
n
|
Displays a charging characteristics-based APN override group
entry and associated settings. This group of settings is configured using the
cc command.
|
Match Charging Characteristics Behavior
|
Indicates the charging characteristic behavior bit value.
|
Match Charging Characteristics Profile-Index
|
Indicates the index value for this charging characteristic
profile.
|
Match Requested APN
|
Identifies the "old" APN network identifier of that is
configured to be overridden/remapped.
|
APN to use for overriding
|
Identifies the "new" APN network identifier to which the APN
will be remapped.
|
Wildcard APN for IPv4
|
Identifies the configuration of the wildcard APN feature for
IPv4 PDP contexts.
|
Wildcard APN for IPv6
|
Identifies the configuration of the wildcard APN feature for
IPv6 PDP contexts.
|
Wildcard APN for IPv4v6
|
Identifies the configuration of the wildcard APN feature for
dual IPv4v6 PDP contexts.
|
Wildcard APN for PPP
|
Identifies the configuration of the wildcard APN feature for PPP
contexts.
|
APN remap Entryn
|
Displays an APN remap group entry and associated settings.
|
Match Input NI wildcard
|
Identifies the "old" APN network identifier that is being mapped
for replacement.
|
Remap Input NI to
|
Identifies the new (target) network identifier to use.
|
Match Input OI wildcard
|
Identifies the "old" APN operator identifier that is being
mapped for replacement.
|
Remap Input OI to
|
Identifies the new (target) operator identifier to use.
|
Replace wildcard MCC in Input OI with
|
Identifies the new (target) MCC value to use. This is specified
using the
value-for-oi-mcc keyword.
|
Replace wildcard MNC in Input OI with
|
Identifies the new (target) MNC value to use. This is specified
using the
value-for-oi-mnc keyword.
|