Access Point Pinouts
This appendix describes the pin signals of the access point Ethernet connectors, and the power injector input and output connectors.
Table C-1 describes the pin signals for the power injector input connector (To Switch).
Table C-1 Power Injector Input Connector (To Switch) Pinouts
|
|
1 |
Ethernet signal pair (10/100/1000BASE-T) |
2 |
3 |
Ethernet signal pair 10/100/1000BASE-T) |
6 |
4 |
Ethernet signal pair (1000BASE-T) |
5 |
7 |
Ethernet signal pair (1000BASE-T) |
8 |
Shield |
Chassis ground |