Cisco Unified Communications Domain Manager Planning and Install Guide, Release 10.6(1)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Preface

Find Matches in This Book

Results

Updated:: June 25, 2015

Chapter: Upgrade Planning

API Compatibility

Upgrade Planning

API Compatibility

In general, APIs are backwards compatible from Cisco Unified Communications Domain Manager 10.6(x) to Cisco Unified Communications Domain Manager 10.1(2). However, you should check the Cisco Unified Communications Domain Manager, Release 10.6(2) API Reference Guide for any non-compatible changes, and plan updates to clients impacted by non-compatible changes.

For a detailed list of differences between release 10.6(1) models and 10.1(2) models, see http://rtp1-netapp-ns-web/Local/hcsgc/Published/API/autogen/published/Release10.6.1-10.6.1.10000-2-Drop43.1-HCM_Standard/apidiff/CUCDM_API_Schema_Diffs_From10.1.2-10.1.2.11001-2-Drop30.10-HCM_Standard_To10.6.1-10.6.1.10000-2-Drop43.1-HCM_Standard.pdf.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)