The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
You should be familiar with the safety procedures involved with electrical circuitry and standard practices for installing communications equipment. For CE1200 Regulatory Compliance and Safety Information, see - https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/install_guide/CE1200/RCSI-0362-book.pdf.
To view environmental and power specifications for the appliance server, see - https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series-rack-servers/c220m5-lff-specsheet.pdf.
For detailed information about how to install the appliance, see - Cisco UCS C220 M5 Server Installation and Service Guide at https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/hw/C220M5/install/C220M5.html
Information in that guide includes:
Installation guidelines
Rack requirements
Equipment requirements
Slide rail adjustment range
The Cisco Expressway appliance displays two serial numbers:
UCS serial number in format WZPxxxxxxxx. Displayed on the hardware pullout tab, and in the Cisco Integrated Management Controller (CIMC) web interface.
Software serial number in format 52ENNNNN. Displayed on the top panel of the appliance, and in the Cisco Expressway web interface or through SSH.
Feedback