The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
 Note |
The hardware loadout is fixed and should not be changed. |
The CE1400V is derived from a UCS C220 M7 server, with the following components:
|
Item |
Part |
Quantity |
|
|---|---|---|---|
|
Chassis |
UCSC-C220-M7S |
1 |
|
|
Processor |
UCS-CPU-I6544Y |
1 |
|
|
RAM |
UCS-MRX16G1RE3 |
4 |
|
|
Hard Disk (SED) |
UCS-HD600G10KJ4-D |
6 |
|
|
RAID Controller |
UCSC-RAID-M1L16 |
1 |
|
|
NIC |
OCP 3.0 NIC |
UCSC-O-ID10GC-D |
1 |
|
UCSC-OCP3-KIT-D |
1 |
||
|
PCIe SFP+ NIC |
UCSC-PCIEIQ10GF-D |
2 |
|
|
SFP-10G-SR qty up to 4 (10GBASE-SR SFP Module) |
|||
|
GLC-TE qty up to 4 (1000BASE-T SFP transceiver module for Category 5 copper wire) |
|||
|
PCIe Risers |
UCSC-RIS1A-22XM7 |
2 |
|
|
PSU |
UCSC-PSU1-1200W-D |
2 |
|
|
TPM |
UCSX-TPM-002C-D |
1 |
|
|
Miscellaneous |
Rail kit UCSC-RAIL-D |
1 |
|
|
Heat Sink: UCSC-HSLP-C220M7 |
1 |
||
|
DIMM Slot Blanking UCS-DDR5-BLK |
28 |
||
|
Disk slot blanking UCSC-BBLKD-M7 |
4 |
This chapter explains the following:
Power cables are available to order from Cisco.
 Warning |
If you opt not to order power cables from Cisco, you must use cables of the designated type, see Cisco UCS C220 M7 SFF Rack Server Spec Sheet. |
KVM adaptors are available to order from Cisco.
Dongle/Cable for keyboard-video-monitor is N20-BKVM-D=.
CE1400V uses a parts-only field replacement component approach just like Cisco Business Edition 6000/7000 appliances and Cisco Unified Computing System general-purpose servers.
 Caution |
To avoid compatibility issues, use only the supplied SFPs, and follow the other requirements for SFPs in Task 2: Insert the SFP Network Connection Modules. |
If you need to begin a Return Material Authorization (RMA) for any reason, go to Cisco Returns Portal.
Feedback