Sync Side A to Side B
Perform these tasks during a maintenance window to sync Side A and Side B.
Step |
Task |
---|---|
Start services on Side B and set them to start automatically |
|
1. |
On each of the following VMs, select Unified CCE Service Control on the desktop. Start the Unified CCE services and change Startup to Automatic, in this order:
Verify that the services are started. |
Change the Cisco IOS Enterprise Voice Gateway configuration |
|
2. |
Change the Cisco IOS Enterprise Voice Gateway dial-peer configuration to point to both Side A and Side B Unified CVP Servers. |
Enable configuration changes |
|
3. |
Set the following registry key to 0 on either the Side A or Side B Unified CCE Rogger: HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems, Inc.\ICM\<instance name>\Router <A/B>\Router\CurrentVersion\Configuration\Global\DBMaintenance Perform this step on one side only. The change is replicated to the other side automatically. Check the registry on the other side to ensure that the change was replicated. |