Generate CSR to generate a certificate from a custom
or third-party certificate authority.
Certificate Signing Request to your PC and use this CSR to obtain the Public
certificate and primary certificate from the Certificate Authority.
Log in to OS
platform again and navigate to
Certificate/Certificate chain. The
Upload Certificate dialog box opens.
To upload the
public certificate, select
tomcat-trust from certificate name list.
file to upload by performing one of the following steps:
Upload File text box, enter the path to
Browse button and navigate to the file; then, click
primary certificate, select tomcat from certificate name list.
certificate name. This is a .pem file that is generated when the root/public
certificate was installed. To view this file Navigate to certificate management
Find. In the certificate list .pem file name will be
listed against tomcat-trust.
successfully uploading the certificate, navigate to
Find to open the list of certificates.
Click on pem
and der links against tomcat and tomcat-trust to see
Certificate File Data.
server settings using the following commands:
utils service restart cisco
utils service restart
Intelligence Center Reporting service
To upload a custom
certificate with alternate hostname, set the alternate hostname using the CLI
command set web-security. Configure the alternate hostname and use the
procedure above to generate Certificate Signing Request (CSR) and to upload the
certificates. You can access Unified Intelligence Center by using the alternate
hostname as well.
the certificate exception warning, you must access the servers using the Fully
qualified domain name (FQDN) name.
Intelligence Center CSR certificates are signed with sha1WithRSAEncryption
using a 2048-bit RSA public key.