With Cisco Video
Remote Expert, customers and agents can have a face-to-face conversation over
the network and collaborate like never before.
combination of technologies and design that allows the contact center caller
and remote agent to feel as if they are in the same room, the Cisco Contact
Center Enterprise portfolio has the potential to provide great productivity
benefits and transform your business. Organizations use it to control costs,
make decisions faster, improve customer intimacy, and scale scarce resources.
Video Remote Expert
allows video callers to be queued. Optionally, with CVP Video In Queue (ViQ),
the caller can interact through high definition video prompt or navigate a
video menu using DTMF keys. You can deploy Video Remote Expert in
Figure 1. Immersive/Kiosk Remote Expert
You can also deploy
Video Remote Expert in Consumer mode.
Video Remote Expert is a subset of Video Contact Center functionality and addresses a specific use case with a video kiosk that can connect a customer from kiosk to a remote expert agent with the press of a single button. The customer and the agent are then connected with a high definition video feed and can share documents back and forth as well as perform financial transactions. The remote agent can also move the camera so that the agent can show the customer how to perform a task. The customer from the kiosk can be offered a video while the call is in queue waiting for a remote expert. Optionally, with CVP Video In Queue (ViQ), the caller can interact through high definition video prompt or navigate a video menu using DTMF keys.
Video Remote Expert builds on the Unified CCE. There are many deployment models, components, and features that comprise the total Video Remote Expert solution. This chapter addresses only those that are relevant to the contact center implementation for Video Remote Expert.
The following diagram illustrates topology call flow.
Figure 3. Topology Call Flow
Customer submits video call into CCE-CVP data center from branch kiosk.
CCE script invokes CVP Server "Call Studio" application.
Call is connected to VXML gateway and video playback is invoked from Media
Video RTP steamed from Gateway to Phone at branch.
Customer navigates VRU video via DTMF digits.
Customer submits DTMF for digit collection and stored in Call Context via
When customer selects to talk to agent and agent becomes available, CVP transfers
the call from the VXML gateway to the Unified CM managed Video Remote
Customer is connected to Agent and video RTP is streaming from customer video
phone to the agent video phone.
Via phones, agent can move
the video camera around to pan the video if desired.
Desktop sharing is also
available feature if required.
The following figure shows a logical view of the topology.
The following table lists the video infrastructure:
Video Remote Expert
Video Conference Bridge
ISR-G2 with PVDM3
Video Media Server
ViQ videos play back using G.711, AAC-LD, or G.722, whichever the endpoint prefers. However, there is no video resolution scaling in MediaSense. A 320p video plays at 320p on every device, and a 1080p video plays at 1080p on every device. Most devices properly handle any necessary correction to the scaling, but the 8941, 8945, 9951, 9971 devices do not. Upload as 480p or less any video that is intended to play on a 8941, 8945, 9951, 9971 device. MediaSense does not support the G.711 A-Law codec for video playback.