Installation and Upgrade Guide for Cisco Unified Customer Voice Portal, Release 11.6(1)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Installation and Upgrade Guide for Cisco Unified Customer Voice Portal, Release 11.6(1)

Chapter Title

Unified CVP Installation

Results

Updated:
August 11, 2017

Chapter: Unified CVP Installation

Unified CVP Installation

Cisco Unified Customer Voice Portal (CVP) ISO image contains the setup files for all the CVP components in the CVP folder.

Only a local administrator must install the Unified CVP software.


Note

  • Before you install Unified CVP, refer to the licensing information in the Unified CVP Licensing chapter.

  • Ensure that the server chosen for Reporting Server is part of a workgroup.

Install Unified CVP on Virtual Machines

Before you begin

  • Disable large receive offload (LRO) for ESXi for virtualization platform for Unified CVP.

  • Install and configure the Unified Computing System (UCS).

  • Install and boot VMware ESXi.

  • Ensure that ESXi is configured and reachable over the network.

  • Download the OVA template.

Procedure

Step 1

Create the Unified CVP virtual machines using the OVA template.

Step 2

Select the CVP components, as required.

Step 3

Install Windows Server.

Step 4

Install the selected CVP components.

Install Unified CVP Server

Fresh installation of Unified CVP includes the following voice prompt encode format types—u-law, A-law, and G729 for media files. Default applications also get installed along with media files. Choose the format type as per requirement.

Procedure

Step 1

Mount Unified CVP ISO, and run setup.exe.

Step 2

Review and accept the license agreement, and click Next.

Step 3

On the Select Package screen, choose the Unified CVP component to install on your computer, and click Next.

Note 

Internet Information Server (IIS) is the default Media Server supported by Unified CVP. For details on IIS configuration, see the Microsoft documentation.

Step 4

At the Voice Prompt Encode Format Type screen, select one of the following options:

  • U-Law Encoded Wave Format

  • A-Law Encoded Wave Format

  • G729 Encoded Wave Format
Step 5

On the Choose Destination Location screen, select the folder where setup will install files. By default, it is C:\Cisco\CVP.

Step 6

On the X.509 Certificate screen, enter the required information in the form, and click Next.

Step 7

Click Install.

Note 

You cannot cancel the installation when it is in progress.

Step 8

Choose to restart the computer right after the upgrade or to restart it later, and click Finish.

Note 

After successful installation, the CVP Call Server Service Startup Type is set to Automatic by default.

What to do next

Install Operations Console

Install Operations Console

Procedure

Step 1

Perform Steps 1 to 6 of the Install CVP Server procedure.

Step 2

From the Ready to Install the Program screen, review the component that you selected, and click Install.

Step 3

On the Ops Console Password screen, in the Password and Password (for verification) fields, enter a password and re-enter it for confirmation, and click Next.

Note 

Adhere to the password formation criteria that are listed on the Operations Console Password screen section.

Note 

Operations Console Administrator and Web Services Administrator (wsmadmin) use the Operations Console password.

Step 4

Select one of the options to either restart the computer right after installation or later, and click Finish.

What to do next

Install Remote Operations

Install Remote Operations

Procedure

Step 1

Perform Steps 1 to 4 of the Install Operations Console procedure.

Step 2

Choose to restart the computer right after the upgrade or to restart it later, and click Finish.

What to do next

Install Reporting Server

Install Second Drive on Reporting Server Virtual Machine

Procedure

Step 1

Right-click My Computer > Manage.

Step 2

In Storage section, click Disk Management.

Step 3

Select the unformatted partition, which is usually Disk 1.

Step 4

Right-click Online, and initialize the disk.

Step 5

Click Format, and follow the formatting process with NTFS.

Install Unified CVP Reporting Server

IBM Informix database server 12.10 FC3 is installed as part of the Unified CVP Reporting Server.

Before you begin

  • Only the actual Local Administrator (should not be renamed) of this system can install CVP Reporting Server.

  • Ensure that Unified CVP Reporting Server is not part of any domain and is part of a work group.

Procedure

Step 1

Mount the Unified CVP ISO image, and run setup.exe file.

Step 2

Review and accept the license agreement, and click Next.

Step 3

On the Select Package screen, select Reporting Server, and click Next.

Note 
This step takes approximately 30 seconds before moving to the Choose Destination Location window.
Step 4

Select the root drive on which you want the Reporting database data and backup data to reside, and click Next.

Note 
Choose the E drive or the second drive, whose size is more than 400GB, to store the Reporting database data and to keep the backup of data.

The Database Size Selection screen appears, providing the following options:

  • Standard: Requires a minimum of 250GB of free disk space.

  • Premium: Requires a minimum of 375GB of free disk space.

Step 5

Choose the appropriate database size for the license that you purchased, and click Next.

Step 6

From the Ready to Install the Program window, review the component that you have selected, and click Install.

Step 7

On the Reporting Password window, enter a password and re-enter it for confirmation, and click Next.

Note 

  • Adhere to the password formation criteria that are listed on the Operations Console Password screen section.

  • The Reporting password requires that the Minimum Password Age parameter be set to 0 days for both the local and/or domain security policy and is subject to both the Unified CVP password policy and the password policy enforced by the operating system of the computer on which the Reporting Server resides. For each aspect of the password, the Reporting password must meet the requirement of the more restrictive policy. If you are installing CVP Reporting Server please ensure that your local and/or domain security policy for MINIMUM PASSWORD AGE are set to 0 days for the installation of the CVP Reporting Server component (In Windows, Control Panel > Administrative Tools > Local Security Policy > Account Policy > Password Policy). If the reporting password you enter is rejected, review the list of password requirements displayed by the installer and consider your operating system's password requirements. You can reconfigure this password repeatedly until an acceptable password is found.

  • After installation, add the Unified CVP Reporting Server to the domain, if necessary.

Step 8

Choose to restart the computer right after installation or to restart it later, and click Finish.

Install Unified Call Studio

Procedure

Step 1

Mount the Unified CVP software (including CVP Studio) installer ISO image, and run setup.exe.

Step 2

On the Welcome screen, click Next.

Note 

If you click Cancel here or on the dialog screens that follow before the Ready to Install the Program screen, the installation is canceled. The Exit Setup dialog box appears.

Step 3

Review Copyrights to Products used by Call Studio and click Next.

Step 4

Review and accept the license agreement, and click Next.

Step 5

On the Choose Destination Location screen, select the folder where setup will install files. By default, it is C:\Cisco\CallStudio.

Step 6

On the InstallShield Wizard Complete screen, click Install.

Step 7

Click Finish to exit the wizard.

The Call Studio software is installed on your computer.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco