FeedbackContact Cisco
- Open a Support Case
- (Requires a Cisco Service Contract)
| Step 1 | Deactivate virtual-service from the virtual-service config mode by running:
no activate Example: router# configure Configuring from terminal, memory, or network [terminal]? Enter configuration commands, one per line. End with CNTL/Z. router(config)# router(config)# virtual-service vvb router(config-virt-serv)# no activate router(config-virt-serv)# ^Z router# show virtual-service list Virtual Service List: Name Status Package Name ------------------------------------------------------------------------------ vvb Deactivating VVB_11_6_1_ISR4K.ova Name Status Package Name ------------------------------------------------------------------------------ vvb Deactivated VVB_11_6_1_ISR4K.ova
| ||
| Step 2 | In the privileged EXEC mode, run:
virtual-service uninstall name <name> Example: router# virtual-service uninstall name vvb
| ||
| Step 3 | To verify the VVB instance was successfully deactivated/uninstalled, run: |