- Index
- Preface
- Introduction
- Managing Services
- Alarm Configuration
- Alarm Definitions
- Trace Configuration
- Troubleshooting Trace Setting Configuration
- Real-Time Monitoring Configuration
- Alert Configuration in RTMT
- Configuring and Using Performance Monitoring
- Trace Collection and Log Central in RTMT
- Using SysLog Viewer in RTMT
- Using Plug-ins
- Log Partition Monitoring Configuration
- Serviceability Reports Archive Configuration
- SNMP V1/V2c Configuration
- SNMP V3 Configuration
- MIB2 System Group Configuration
Cisco Unified Presence Server Serviceability Administration Guide, Release 1.0(2)
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- August 28, 2006
Chapter: Using SysLog Viewer in RTMT
Using SysLog Viewer in RTMT
To display messages in SysLog Viewer, perform the following procedure:
Procedure
Step 1 
Perform one of the following tasks:
•In the Quick Launch Channel, click the Tools tab; then, click SysLog Viewer and the SysLog Viewer icon.
•Choose Tools > SysLog Viewer> Open SysLog Viewer.
Step 2 From the Select a Node drop-down list box, choose the server where the logs that you want to view are stored.
Step 3 Click the tab for the logs that you want to view.
Step 4 After the log displays, double-click the log icon to list the file names in the same window.
Step 5 To view the contents of the file at the bottom of the window, click the file name.
Step 6 Click the entry that you want to view.
Step 7 To view the complete syslog message, double-click the syslog message. You can also use the following buttons that are described in Table 11-1 to view the syslog messages:
Tip To make a column larger or smaller, drag the arrow that displays when your mouse hovers between two column headings.
Tip You can order the messages by clicking on a column heading. The first time that you click on a column heading, the records display in ascending order. A small triangle pointing up indicates ascending order. If you click the column heading again, the records display in descending order. A small triangle pointing down indicates descending order. If you click the column heading one more time, the records displays in the unsorted state.
Tip You can filter the results by choosing an option in the Filter By drop-down list box. To remove the filter, click Clear Filter. All logs display after you clear the filter.
Additional Information
See the Related Topics.
Feedback