Skip to content
Skip to search
Skip to footer

XML Reference Guide for Cisco IP DECT 6800 Series

Available Languages

Download Options

PDF (1.6 MB)
View with Adobe Reader on a variety of devices
ePub (856.1 KB)
View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle) (1.4 MB)
View on Kindle device or Kindle app on multiple devices

Updated:December 19, 2023

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This guide explains each xml tag used in the configuration file (.xml) of Cisco IP DECT 6800 Series . Each tag represents a parameter in the phone.

Each xml tag definition includes details such as command syntax, default value, and description.

New and Changed Information

Revision History


Release	What's New and Updated
Firmware Release 5.1(2)	Cfg_Rep_OnChange Cfg_Rep_Period Firewall Firewall_Config
Firmware Release 5.1(1)	PRT_http_header PRT_http_header_value PRT_upload_filename PRT_upload_server Hebu_Mode Subscr_Hebu_Password_n_ Subscr_Hebu_Username_n_ Language_Rule Held_Company_Id Held_Token_Srvn Reg_Retry_Intvl_High_Rnd Reg_Retry_Long_Intvl_High_Rnd Srv_Failback_Before_Failover_n_ Hs_Admin_Pin_n_ Hs_Alarm_Enable_n_ Hs_Alarm_n_ Hs_Alert_Tone_n_ Hs_Alert_Vol_n_ Hs_Auto_Answer_n_ Hs_Auto_Keylock_n_ Hs_Bluetooth_n_ Hs_Charger_Warn_n_ Hs_Config_Protocol Hs_Config_Server Hs_Config_Server_Password Hs_Config_Server_Username Hs_Confirm_Sound_n_ Hs_Coverage_Warn_n_ Hs_Hide_Number_n_ Hs_Idle_Clock_n_ Hs_Idle_Screen_n_ Hs_Key_Sound_n_ Hs_Led_Green_n_ Hs_Led_Orange_n_ Hs_Led_Red_n_ Hs_Line_n_ Hs_Msg_Display_n_ Hs_Msg_Overwrite_Old_n_ Hs_Msg_Send_n_ Hs_Name_n_ Hs_Phone_Lock_n_ Hs_Power_Save_n_ Hs_Ptt_n_ Hs_Rec_Alarm_Enable_n_ Hs_Rec_Alarm_n_ Hs_Ring_Emerg_High_n_ Hs_Ring_Emerg_Low_n_ Hs_Ring_Emerg_Mid_n_ Hs_Ring_Mel_n_ Hs_Ring_Norm_Msg_n_ Hs_Ring_Urgent_Msg_n_ Hs_Ring_Vol_n_ Hs_Select_Network_n_ Hs_Silent_Charging_n_ Hs_Silent_n_ Hs_Unlock_Pin_n_ Hs_Vibrate_n_ Call_Id_Map_n_ Call_Id_Map_Subscription_n_ Call_group_SIP_account_n_ Subcsr_Call_Group_Subscribed_ Subscr_Intercom_Enabled_
Firmware Release 5.0(1)	Introduced the document for Cisco IP DECT 6800 Series XML parameters running SIP Firmware Release 5.0(1) with Cisco BroadWorks version 22 and later.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)

This Document Applies to These Products

IP DECT 6800 Series with Multiplatform Firmware