Release Notes for Cisco MGCP IP Phone 7940/7960 Release 7.0

Table Of Contents

Release Notes for Cisco MGCP IP Phone 7940/7960 Release 7.0

Contents

New and Changed Information

New Software Features in Release 7.0

Memory Storage

Installation Notes

Caveats

Open Caveats—Release 7.0

Resolved Caveats—Release 7.0

Related Documentation

Obtaining Documentation

Cisco.com

Ordering Documentation

Documentation Feedback

Documentation Survey

Obtaining Technical Assistance

Cisco TAC Website

Opening a TAC Case

TAC Case Priority Definitions

Obtaining Additional Publications and Information

Release Notes for Cisco MGCP IP Phone 7940/7960 Release 7.0

---

May 24, 2004

Contents

This document lists the known problems in Cisco Media Gateway Control Protocol (MGCP) IP Phone 7940/7960 Release 7.0 and contains information about the Cisco MGCP IP Phone 7940/7960 (hereafter referred to as the Cisco MGCP IP phone) that is not included in the most recent release of the phone documentation.

This document includes the following sections:

•Contents

•New and Changed Information

•Installation Notes

•Caveats

•Related Documentation

•Obtaining Documentation

•Obtaining Technical Assistance

New and Changed Information

New Software Features in Release 7.0

The following new software features are supported in Cisco IP Phone 7940/7960 Release 7.0.

Memory Storage

A new design approach is used to store the existing software base in the Cisco 7960 and Cisco 7940 telephones. The new approach utilizes a "run from flash" design to use the Flash and RAM memory available more efficiently.

Installation Notes

For Cisco MGCP IP phones, follow the instructions in the "Performing an Image Upgrade and Remote Reboot" section at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipp7960/addprot/mgcp/frmwrup.htm

For these instructions, use P0M3-07-0-00.sbn as the image name for Release 7.0. You can find the current images at the following URL:

http://www.cisco.com/cgi-bin/tablebuild.pl/mgcp-ip-phone7960

Caveats

Open Caveats—Release 7.0

No open caveats are in Cisco IP Phone 7940/7960 Release 7.0 that require documentation in these release notes.

Resolved Caveats—Release 7.0

All caveats listed in this section are resolved in Cisco IP Phone 7940/7960 Release 7.0. This section lists only severity 1 and 2 caveats and select severity 3 caveats.

•CSCdt41394: Phone reboots on menu-calllogs-incoming-<go offhook> seq

•CSCdt41469: Phone crashes on Tone-generation Stress test

•CSCdt41830: Quick feature key presses in succession cause phone crash

•CSCdt45428: Add time & date display on mgcp phone screen

•CSCdt53139: * representation needed on phone when * key pressed

•CSCdt53148: Fine tuning of the XML input rollout screen needed.

•CSCdt57063: XML - wrong post operation by phone on Reachme Fkey press

•CSCdt67719: Calling phone hangs if called phone answers very quickly

•CSCdt67725: Call-timer changes to zero when op-page selection changed

•CSCdt68634: 2nd incoming call not handled properly by phone

•CSCeb50035: Phone loses sidetone with g711ulaw codec during call hold

•CSCeb52746: 24-hour Stress cause DSP Alarms/Errors for SIP

•CSCeb52765: 24-hour Stress cause DSP Alarms/Errors for MGCP

•CSCeb59991: SIPPhone: Unable to change ring volume when headset is in use

•CSCeb67452: Multiple calls with different codecs cause crash

•CSCeb70854: Phone loses voice path with g711ulaw

•CSCeb71065: Stress crash from MGCP

•CSCeb73808: Crash after multiple X-fer during basic call

•CSCec04268: Customer complaints about digits sounding bad

•CSCec25740: Rx path is going away when making a basic call

•CSCec26918: Ringer in Alert-Info header for 183 message plays default

•CSCec65603: Changing network config causes memory leak

•CSCec65624: Phone crashes after bugtrap 0x18

•CSCed00918: 7960 MGCP phone needs to have square brackets configurable

•CSCed02066: 7960 MGCP phone needs to have Endpoint identifier configurable

•CSCed13693: Add GARP Disable Option

Related Documentation

•Cisco MGCP IP Phone Administrator Guide, Release 7.0

•Cisco IP Phone 7960 and 7940 Series at a Glance

•Regulatory Compliance and Safety Information for the Cisco IP Phone 7960, 7940, and 7910 Series

•Installing the Wall Mount Kit for the Cisco IP Phone

Obtaining Documentation

Cisco provides several ways to obtain documentation, technical assistance, and other technical resources. These sections explain how to obtain technical information from Cisco Systems.

Cisco.com

You can access the most current Cisco documentation on the World Wide Web at this URL:

http://www.cisco.com/univercd/home/home.htm

You can access the Cisco website at this URL:

http://www.cisco.com

International Cisco websites can be accessed from this URL:

http://www.cisco.com/public/countries_languages.shtml

Ordering Documentation

You can find instructions for ordering documentation at this URL:

http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm

You can order Cisco documentation in these ways:

•Registered Cisco.com users (Cisco direct customers) can order Cisco product documentation from the Networking Products MarketPlace:

http://www.cisco.com/cgi-bin/order/order_root.pl

•Registered Cisco.com users can order the Documentation CD-ROM through the online Subscription Store:

http://www.cisco.com/go/subscription

•Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco Systems Corporate Headquarters (California, U.S.A.) at 408 526-7208 or, elsewhere in North America, by calling 800 553-NETS (6387).

Documentation Feedback

You can submit e-mail comments regarding Cisco IOS software release notes and caveats documentation to relnote-feedback@cisco.com.

You can submit e-mail comments about technical documentation to bug-doc@cisco.com.

You can submit comments by using the response card (if present) behind the front cover of your document or by writing to the following address:

Cisco Systems
Attn: Customer Document Ordering
170 West Tasman Drive
San Jose, CA 95134-9883

We appreciate your comments.

Documentation Survey

Is Cisco documentation helpful? Click here to give us your feedback or go to the following URL to give us your feedback:
http://www.cisco.com/warp/public/732/docsurvey/rtg/ to give us your feedback.

Obtaining Technical Assistance

For all customers, partners, resellers, and distributors who hold valid Cisco service contracts, the Cisco Technical Assistance Center (TAC) provides 24-hour-a-day, award-winning technical support services, online and over the phone. Cisco.com features the Cisco TAC website as an online starting point for technical assistance. If you do not hold a valid Cisco service contract, please contact your reseller.

Cisco TAC Website

The Cisco TAC website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The Cisco TAC website is available 24 hours a day, 365 days a year. The Cisco TAC website is located at this URL:

http://www.cisco.com/tac

Accessing all the tools on the Cisco TAC website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a login ID or password, register at this URL:

http://tools.cisco.com/RPF/register/register.do

Opening a TAC Case

Using the online TAC Case Open Tool is the fastest way to open P3 and P4 cases. (P3 and P4 cases are those in which your network is minimally impaired or for which you require product information.) After you describe your situation, the TAC Case Open Tool automatically recommends resources for an immediate solution. If your issue is not resolved using the recommended resources, your case will be assigned to a Cisco TAC engineer. The online TAC Case Open Tool is located at this URL:

http://www.cisco.com/tac/caseopen

For P1 or P2 cases (P1 and P2 cases are those in which your production network is down or severely degraded) or if you do not have Internet access, contact Cisco TAC by telephone. Cisco TAC engineers are assigned immediately to P1 and P2 cases to help keep your business operations running smoothly.

To open a case by telephone, use one of the following numbers:

Asia-Pacific: +61 2 8446 7411 (Australia: 1 800 805 227)
EMEA: +32 2 704 55 55
USA: 1 800 553-2447

For a complete listing of Cisco TAC contacts, go to this URL:

http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml

TAC Case Priority Definitions

To ensure that all cases are reported in a standard format, Cisco has established case priority definitions.

Priority 1 (P1)—Your network is "down" or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.

Priority 2 (P2)—Operation of an existing network is severely degraded, or significant aspects of your business operation are negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation.

Priority 3 (P3)—Operational performance of your network is impaired, but most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels.

Priority 4 (P4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations.

Obtaining Additional Publications and Information

Information about Cisco products, technologies, and network solutions is available from various online and printed sources.

•The Cisco Product Catalog describes the networking products offered by Cisco Systems, as well as ordering and customer support services. Access the Cisco Product Catalog at this URL:

http://www.cisco.com/en/US/products/products_catalog_links_launch.html

•Cisco Press publishes a wide range of networking publications. Cisco suggests these titles for new and experienced users: Internetworking Terms and Acronyms Dictionary, Internetworking Technology Handbook, Internetworking Troubleshooting Guide, and the Internetworking Design Guide. For current Cisco Press titles and other information, go to Cisco Press online at this URL:

http://www.ciscopress.com

•Packet magazine is the Cisco quarterly publication that provides the latest networking trends, technology breakthroughs, and Cisco products and solutions to help industry professionals get the most from their networking investment. Included are networking deployment and troubleshooting tips, configuration examples, customer case studies, tutorials and training, certification information, and links to numerous in-depth online resources. You can access Packet magazine at this URL:

http://www.cisco.com/go/packet

•iQ Magazine is the Cisco bimonthly publication that delivers the latest information about Internet business strategies for executives. You can access iQ Magazine at this URL:

http://www.cisco.com/go/iqmagazine

•Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL:

http://www.cisco.com/en/US/about/ac123/ac147/about_cisco_the_internet_protocol_journal.html

•Training—Cisco offers world-class networking training. Current offerings in network training are listed at this URL:

http://www.cisco.com/en/US/learning/index.html